3SIXT JetPak PowerMix PD Інструкція з експлуатації - Сторінка 2

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Аксесуари 3SIXT JetPak PowerMix PD. 3SIXT JetPak PowerMix PD 3 сторінки.

NAME PARTS

1. LCD Power Level Percentage

2. QC3.0 USB-A Output

3. Type-C PD Input / Output

4. Micro USB Input

5. Power On/Off

6. 15W Qi Charging Pad

OPERATION

Charging your Device with a Cable

1. Locate the desired output port (2 or 3) on the JetPak PowerMix Power Bank.

2. Make sure that the selected output is clear of obstruction (dirt/dust etc).

3. Locate the desired charging cable you want to charge your device with (Type-C/Micro

USB/Lightning/30 Pin etc).

4. Plug the cable of choice into the desired output port (2 or 3) making sure to lightly push it in (do not

push with excessive force).

5. Plug the cable connector (Type-C/Micro USB/Lightning/30 Pin etc) into your device and push it in

making sure it is connected (do not push with excessive force).

6. Push the Power on/off button (5). The device will then commence charging. A visual/audible

notification will be made via your device if off silent mode.

7. To stop charging simply remove the cable from device or the 3SIXT JetPak PowerMix Power Bank from

the cable and charging will discontinue.

Charging your Device Wirelessly

1. Locate the Qi charge pad on your 3SIXT JetPak PowerMix Power Bank (6).

2. Press the power on/off button (5) once.

3. Check that the LCD power level percentage turns on (1).

4. Lay 3SIXT JetPak PowerMix Power Bank on a flat/stable surface and place your Qi wireless compatible

device charging side down on top of the Qi charging pad (6). The device will then commence charging. A

visual/audible notification will be made via your device.

5. To stop charging simply remove the device from the Qi Wireless Charging Pad (6).

www.3sixtgear.com

or visit www.3sixtgear.com/support