AOM EAN-400 Технічні характеристики - Сторінка 19

Переглянути онлайн або завантажити pdf Технічні характеристики для Системи фільтрації води AOM EAN-400. AOM EAN-400 20 сторінок. Electrostatic filters
Також для AOM EAN-400: Посібник з монтажу та обслуговування (13 сторінок)

Друкувати сторінку

If this has occurred spontaneously, has the EAN ESP

unit been periodically cleaned?

If this has occurred spontaneously and the EAN ESP

unit been periodically cleaned, then

Problem: The unit is working corectly, but sparking can be heard

Has the EAN ESP unit been periodically maintained?

WARRANTY AND CONTACTS

9.1

Product Warranty

9.1.1

AOM provides a limited warranty for metropolitan areas in each state of Australia subject to the points detailed

hereunder.

9.1.2

To validate the warranty, the EAN ESP unit shall be installed and maintained as per AOM specifications.

9.1.3

The warranty period begins at the date of dispatch of EAN ESP unit.

9.1.4

An EAN ESP unit is warranted to be free from defects and/or workmanship for a period of one (1) year from the date of

dispatch.

9.1.5

A spare part is warranted to be free from defects and/or workmanship for a period of ninety (90) days from the date of

dispatch.

9.1.6

If a client is not able to prove that the equipment has been cleaned and maintained as per AOM requirements, this may

be cause to void the warranty. To this effect, it is recommended that maintenance logbook be kept on the premises.

9.1.7

The warranty for new equipment and spare part covers the repair or replacement of the defective part and includes

labour.

9.1.8

Any claim must be presented to AOM. No warranty repairs will be granted without AOM written consent.

9.1.9

The above limited warranty does not apply to damage resulting from accident, alteration, misuse, mishandling or if

the serial number is removed or defaced. This extends to the EAN ESP unit electrostatic cells.

9.1.10

AOM quotes equipment in good faith according to data supplied by others. AOM cannot be held responsible for the

following: product performance issues (excessive discharge of smoke, grease and odour) arising from duct design, fan

selection, unknown type of cooking, air velocity and failure to perform maintenance procedures.

9.2

Contacts

9.2.1

For any questions concerning the information provided in these specifications, please contact your dedicated AOM

Representative. Contact details can be found on the AOM website www.aomaus.com.au/Local‐Contacts

9.2.2

For any servicing and maintenance issues please contact the AOM Australia Service Team on either 1300 903 088 or by

sending an email to [email protected].

21/54 Beach Street Kogarah NSW 2217 Tel Sales 1300 903 788 Service 1300 904 088

rev 1, 22/09/2016

If no visible damage to the cells, it is a problem with a cell insulator

and the cells need to be tested.

If no, the unit will need to be cleaned and a full service carried out.

The issue is with the EAN ESP high voltage board which needs to be

replaced.

If no, the unit will need to be cleaned.

If yes, this is generally caused by larger particles been broken down in

the EAN ESP unit. Contact your AOM Representative if the noise

persists.

AOM AUSTRALIA