Cashmaster Sigma 105 Посібник із швидкого старту
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Касовий апарат Cashmaster Sigma 105. Cashmaster Sigma 105 2 сторінки.
Також для Cashmaster Sigma 105: Посібник із швидкого старту (2 сторінок), Посібник з поширених запитань (7 сторінок), Посібник з поширених запитань (9 сторінок), Посібник з поширених запитань (6 сторінок), Посібник з поширених запитань (9 сторінок)
Getting Started
1. Place the Cashmaster on a firm even surface, ensure the tray is empty, press
2. Insert tray pushing down very firmly until it clicks.
3. Calibrating cup or scoop: You may only have one cup weight in machine memory at a time, since these do
not weigh the same you need to decide if you will use the scoop or the till cups for coins. Upon first turning unit
on, it will prompt for place empty cup. Now place either cup OR scoop on the hod. To re-calibrate scoop or cup,
see section on other side.
Keypad
ON/OFF – Press to Switch
machine on/off
Screen
Auto Scroll
Battery in use
Denomination
Coins / Bills
Selected currency
Total / Bank indicator
Features
Auto add
Press and hold the 'F' key and
press the 'PLUS (C/+)' key. This will
toggle Auto Add state. " + " will be
displayed on the screen when Auto
Add is on.
Bank On/Off
Press and hold down the 'F' key
and press the "UP" key.
This will allow Bank mode to be
activated or
deactivated.
UP and DOWN - Used to
select required denominations
COINS / BILLS - Used for selecting
coins, bills or rolls
1c
Coins
USD
Total
CLEARING / ADDING -
Used for clearing values
and addng to totals
19.03.2017
Scoop
Mobility
The unit has a built in
battery for mobile use.
Using mobile allows for
remote or on floor counting
to be done. Remember to
recharge after use.
Bank Setting
Press and hold down the 'F'
key and press the
"Coins/Bills" key.
This will allow you to set the
Bank amount.
key.
PRINT - Press once for a printout
(Note: Not intended for Walgreens
money sclaes)
FUNCTION - Used to
access various
functions
Auto Add
Date
11.23
Time
Scoop / No. of pieces
Sub total
0,00
0,00
Running total
Auto Scroll
Press and hold the "F" key and
press the "DOWN" key. This will
toggle AutoScroll state. An
upward arrow will be displayed
on the screen when AutoScroll is
on.
Calibrate Scoop
Press and hold down the "F"
key and press the 'ON/OFF'
key and follow the onscreen
instructions.