Cashmaster OMEGA C Fast Charge Series 1000 Інструкція з експлуатації - Сторінка 5
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Лічильники готівки та сортувальники монет Cashmaster OMEGA C Fast Charge Series 1000. Cashmaster OMEGA C Fast Charge Series 1000 12 сторінок. Coin and note counting machine
Друкувати сторінку16. Troubleshooting
Coins
Mode
Message
Loose coin counting
PRESS ZERO KEY
Roll verify
*** SUSPECT ROLL***
Bills
Loose bill counting
PRESS ZERO KEY
Loose bill counting
REMOVE SCOOP FROM
SCALE
Loose bill counting
TOO MANY BILLS -
REMOVE SOME
Straps
*** SUSPECT BUNDLE***
Misc.
BATTERY LOW
Page 20
Description
Wrong or damage cup may have
been applied or Omega "C" has
drifted from zero (usually due to
draught or vibration). User should
ensure that display indicates zero
when empty cup is applied in loose
coin mode.
Roll applied is suspect. User may
leave roll on cash tray and select the
correct denomination for an esti-
mated roll amount. For an accurate
count, it is necessary to split the roll
and count in loose coin mode.
Omega "C" has drifted from zero
(usually due to draught or vibration).
User has selected a bill denomination
while the cup is still on the cash tray
OR the On/Zero key was pressed in
loose coin mode when the display
was showing "CUP". Remove the
cup if it's on the cash tray. If not,
press the On/Zero key to reset to
zero.
Bills should be applied in amounts of
20-25 at a time. User should remove
a few until the message disappears
then continue applying bills to those
on the cash tray.
Bundle applied is suspect. User must
split bundle and count in loose bills
mode.
Recharge battery.
1. Keys (continued)
FUNCTION KEY
•
Press and hold the <F> key and, at the same time, press <+> to switch Auto
Add on or off (see page 12).
•
Press and hold the <F> key and, at the same time, press bill < > to set the
starting bank amount (see page 10).
Press <F> to store the amount and return to normal operation.
•
Press and hold the <F> key and, at the same time, press coin < > to switch
starting bank mode on or off (see page 11).
•
Press and hold the <F> key and, at the same time, press the <Print> key to
transmit totals to your PC's interface program.
Page 5