Aoni 621BT Посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача для Спікери Aoni 621BT. Aoni 621BT 3 сторінки.

Ensure that the speaker is off and that the phone is on.

Push the power key to "ON "and you will hear a beep sound. Then the blue led light will blink every 0.5 seconds. It's now

ready for pairing.

Note: If the Bluetooth Speaker does not pair successfully with the Bluetooth device in 20 minutes, the blue led light will keep

blink every 0.5 seconds.

If Bluetooth device does not connect to the speaker in 50 minutes, Bluetooth will be off automatically.

Activate the Bluetooth function on your phone and search for Bluetooth devices.

Select the Bluetooth speakers aoni‐621 from the list of devices found.

You may be prompted to enter a Bluetooth passcode for some devices. If necessary, enter the Bluetooth passcode 0000 to pair

the speaker to the bluetooth devices. In some devices you may need to connect to the speaker separately after pairing.

Note: If the pairing is successful and the speaker is in Bluetooth connection with the music device, you will hear a beep sound

and the blue led light flashes 2 times about every 3 seconds.

This speaker includes hands‐free calling function. When it successfully establishes a Bluetooth connection to your mobile

phone, you can press

button to answer or end a call.

Reconnection in Event of Bluetooth Disconnection

If by any reason your device and the Speaker are disconnected, such as out of connection distance or powering off, the Speaker

will "auto‐connect" with compatible devices that auto‐search and re‐connect with their last connecting device, the

reconnection time is 30 seconds, pls don't operate the speaker at that time.

If want to connect with the other Bluetooth devices after succeed in paring current Bluetooth device, you can long press

button for 3‐4 seconds and the blue led light will blink every 0.5 seconds with a beep sound, then connect.

Controlling Playback When Connected Via Bluetooth:

Volume: Using the volume controls on the top of the Speaker, press the (+) button to increase volume and the (‐) button to

decrease volume.

Pause music: Press

button to pause playback. Press again to resume music.

Connecting to a Device via 3.5 mm "AUX" Input

You can use 621BT Bluetooth Speaker for music playback with any device which has a 3.5 mm headphone port. Simply plug one

end of 3.5mm audio cable into your device's headphone port. Plug the other end of 3.5mm audio cable into the 3.5mm AUX in

port on the back of the 621BT Bluetooth Speaker, then Play music.

When Connected Via 3.5 mm "AUX" Input:

Note: Pause cannot be controlled with the

input; the green LED light will be normally on. Use the volume control on your device as you normally would.

Recharging Battery

Plug the Micro USB end of the included USB charging cable into the Micro USB port of the 621BT. Plug the other end into a USB

port on your computer or other devices made for USB charging. The LED light will begin to RED. It will be Green at full charged.

Charging time is 4 hours from an empty battery, it's better to charge 12 hours at the first three times.

FCC STATEMENT

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to

operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

button on the 621BT Bluetooth Speaker when connected via the 3.5 mm "AUX"