Casio 2271 Посібник користувача
Переглянути онлайн або завантажити pdf Посібник користувача для Дивись. Casio 2271. Casio 2271 9 сторінок. Casio watch operation guide 2271
Друкувати сторінку
- 1. Getting Acquainted
- 2. General Guide
- 3. Digital Compass
- 4. Alarm
- 5. Stopwatch
- 6. Backlight
- 7. Deleting Altitude Measurement Record
- 8. Warning Indicators
- 9. Questions and Answers
- 10. Data and Setting Scrolling
- 11. Timekeeping
- 12. Auto Return Features
- 13. Calibrating the Bearing Sensor
- 14. Changing Barometric Pressure/Temperature Units
- 15. Calibrating the Temperature Sensor
Module No. 2271
GETTING ACQUAINTED
Congratulations upon your selection of this CASIO watch. To get the most out
of your purchase, be sure to carefully read this manual and keep it on hand
for later reference when necessary.
Applications
The built-in sensors of this watch measure direction, altitude, barometric
pressure, and temperature. Measured values are then shown on the display.
Such features make this watch useful when hiking, mountain climbing, or
when engaging in other such outdoor activities.
• The measurement functions built into this watch are not intended for
taking measurements that require professional or industrial precision.
Values produced by this watch should be considered as reasonable
representations only.
• When engaging in mountain climbing or other activities in which losing
your way can create a dangerous or life-threatening situation, always
be sure to use a second compass to confirm direction readings.
• CASIO COMPUTER CO., LTD. assumes no responsibility for any loss,
or any claims by third parties that may arise through the use of this
watch.
GENERAL GUIDE
• If the digital display of your watch is continuously changing, see
"Auto Display Function" for information on how to stop it.
• The illustration below shows which buttons you need to press to navigate
between modes.
Recall Mode
D
Alarm Mode
D
Stopwatch Mode
PM indicator
Seconds
Day of week
Year
Hour : Minutes
Month – Day
Warning!
Press D.
Timekeeping Mode
L
L
D
TIMEKEEPING
Use the Timekeeping Mode to set and view
the current time and date.
To reset the seconds count to zero
1. In the Timekeeping Mode, hold down A
until the second digits start to flash, which
indicates the setting screen.
2. Press E to reset the seconds count to
• Pressing E while the seconds count is
in the range of 30 to 59 resets the
seconds to
00
and adds 1 to the
minutes. In the range of 00 to 29, the
minutes count is unchanged.
3. Press A to exit the setting screen.
About This Manual
(Light)
• In any mode, hold down D for about one second to return to the
Timekeeping Mode.
• You can use buttons B, C, and E to directly enter a sensor mode from
the Timekeeping Mode or from another sensor mode. To get to a sensor
mode from the Recall, Alarm, or Stopwatch Mode, you must go to the
Timekeeping Mode first.
Press B.
D
C
D
E
D
To set the time and date
00
.
Seconds
Day
3. While a setting is flashing, use E (+) and B (–) to change it.
• When the 12/24-hour setting is selected, press E or B to toggle
between 12-hour (
4. Press A to exit the setting screen.
• Button operations are indicated using the
letters shown in the illustration.
• Each section of this manual provides you
with the information you need to perform
operations in each mode. Further details
and technical information can be found in
the "REFERENCE" section.
Sensor Modes
Digital Compass Mode
Barometer/
Thermometer Mode
Altimeter Mode
1. In the Timekeeping Mode, hold down A
until the second digits start to flash, which
indicates the setting screen.
2. Press D to move the flashing in the
sequence shown below to select other
settings.
12/24-Hour
Minutes
Hour
Format
Month
Year
12H
) and 24-hour (
24H
) timekeeping.
2271-1