Casio 2463 Посібник з експлуатації - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Дивись. Casio 2463. Casio 2463 7 сторінок. Casio watch user manual

Друкувати сторінку

Alarms

You can set up to three independent multi-

Alarm date

function alarms with hour, minutes, month, and

(Month – Day)

day. When an alarm is turned on, the alarm tone

sounds when the alarm time is reached. You can

select either a one-time alarm or snooze alarm.

You can also turn on an Hourly Time Signal that

causes the watch to beep twice every hour on the

hour.

• The alarm number of the display indicates the

alarm type, as described below.

AL1

Alarm number

SNZ

Alarm time

SIG

(Hour : Minutes)

• Alarm settings (and Hourly Time Signal

settings) are available in the Alarm Mode,

which you enter by pressing C.

Alarm Types

The alarm type is determined by the settings you make, as described below.

• Daily alarm

Set the hour and minutes for the alarm time. This type of setting causes the

alarm to sound everyday at the time you set.

• Date alarm

Set the month, day, hour and minutes for the alarm time. This type of setting

causes the alarm to sound at the specific time, on the specific date you set.

• 1-Month alarm

Set the month, hour and minutes for the alarm time. This type of setting

causes the alarm to sound everyday at the time you set, only during the

month you set.

• Monthly alarm

Set the day, hour and minutes for the alarm time. This type of setting causes

the alarm to sound every month at the time you set, on the day you set.

To set an alarm time

1. In the Alarm Mode, press D to scroll through

the alarm screens until the one whose time

you want to set is displayed.

AL1

2. After you select an alarm, hold down A until

Alarm on indicator

the hour setting of the alarm time starts to

flash, which indicates the setting screen.

• This operation automatically turns on the

alarm.

3. Press C to move the flashing in the sequence shown below to select

other settings.

Hour

Minutes

4. While a setting is flashing, use D (+) and B (–) to change it.

• To set an alarm that does not include a month (Daily alarm, Monthly

for the month. Use D and B until the

alarm), set

(between 12 and 1) while month setting is flashing.

• To set an alarm that does not include a day (Daily alarm, 1-Month

for the day. Use D and B until the

alarm), set

(between 31 and 1) while the day setting is flashing.

• When setting the alarm time using the 12-hour format, take care to set

the time correctly as a.m. (no indicator) or p.m. (P indicator).

5. Press A to exit the setting screen.

Alarm Operation

The backgrounds of the upper and lower part of the display flash starting from

the point the Timekeeping Mode time reaches one hour before an alarm time.

This pre-alarm feature lets you know that an alarm time is about to be

reached. When the actual alarm time is reached, an alarm tone sounds for 20

seconds. In the case of the snooze alarm, the alarm repeats up to seven

times every five minutes until the alarm is turned off.

• Pressing any button stops the pre-alarm operation or the alarm tone operation.

• The pre-alarm feature works in the Timekeeping Mode only.

To test the alarm

In the Alarm Mode, hold down D to sound the alarm.

To turn the one-time alarm and the Hourly Time Signal on and off

1. In the Alarm Mode, press D to select a one-time alarm (

or the Hourly Time Signal (

SIG

2. When the alarm or the Hourly Time Signal you want to is selected, press

B to turn it on and off.

Indicates alarm is on.

Indicates Hourly Time Signal is on.

• The alarm on indicator (

) and the Hourly Time Signal on indicator (

are shown on the display in all modes while these functions are turned

on.

• If any alarm is on, the alarm on indicator is shown on the display when

you change to another mode.

Operation Guide 2463

AL2

and

: One-time alarm screen

: Snooze alarm screen

: Hourly Time Signal screen

AL2

SNZ

SIG

Month

Day

mark appears

AL1

AL2

To turn the snooze alarm on and off

1. In the Alarm Mode, press D to select the snooze alarm (

2. Press B to turn it on (

• The snooze alarm on indicator (

modes while this function is turned on.

Backlight

Auto light switch on indicator

To turn on the backlight manually

In the Countdown Timer and Stopwatch Modes, pressing D turns on the

backlight for about two seconds. In any other mode (Timekeeping, Site Time,

Moon/Tide Data, Sunrise/Sunset, and Alarm Modes), pressing L turns on

the backlight for about two seconds.

• The above operation turns on the backlight regardless of the current auto

light switch setting.

About the Auto Light Switch

Turning on the auto light switch causes the backlight to turn on for about two

seconds, whenever you position your wrist as described below in any mode.

• Be sure to wear the watch on the outside of your left wrist while using the

auto light switch.

Moving the watch to a position that is parallel to the ground and then tilting

it towards you more than 40 degrees causes the backlight to turn on.

Warning!

• • • • • Always make sure you are in a safe place whenever you are reading

the display of the watch using the auto light switch. Be especially

careful when running or engaged in any other activity that can result

in accident or injury. Also take care that sudden illumination by the

auto light switch does not surprise or distract others around you.

• • • • • When you are wearing the watch, make sure that its auto light switch

is turned off before riding on a bicycle or operating a motorcycle or

any other motor vehicle. Sudden and unintended operation of the auto

light switch can create a distraction, which can result in a traffic

accident and serious personal injury.

To turn the auto light switch on and off

In the Timekeeping Mode, hold down L for about one second to toggle the

auto light switch on (

• The auto light switch on indicator (

the auto light switch is turned on.

Reference

This section contains more detailed and technical information about watch

operation. It also contains important precautions and notes about the various

features and functions of this watch.

Auto Display

)

SNZ

displayed) and off (

not displayed).

) is shown on the display in all

The backlight uses an EL (electro-luminescent)

panel that causes the entire display to glow for

easy reading in the dark. The watch's auto light

switch automatically turns on the backlight when

you angle the watch towards your face.

• The auto light switch must be turned on

(indicated by the auto light switch on indicator)

for it to operate.

• See "Backlight Precautions" for other important

information about using the backlight.

Parallel to

ground

displayed) and off (

not displayed).

) is on the display in all modes while

Auto Display continually changes the contents of

the digital display.

To turn off Auto Display

Press any button (except for L) to turn off Auto

Display. This returns to the Timekeeping Mode.

To turn on Auto Display

Hold down C for about three seconds until the

watch beeps.

• Note that Auto Display cannot be performed

while a setting screen is on the display.

More than

40°