Danfoss BasicPlus2 WT-DM Посібник користувача - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник користувача для Терморегулятор Danfoss BasicPlus2 WT-DM. Danfoss BasicPlus2 WT-DM 4 сторінки. Room thermostats for floor heating
Також для Danfoss BasicPlus2 WT-DM: Посібник з монтажу (11 сторінок)
Друкувати сторінку
User Guide
1
Functional Overview
Symbols
Function description
Room temperature
Floor temperature
Temperature indication
Set temperature
SET
Floor heating, Active
Frost protection, Active
2
Power ON/OFF
Turn the thermostat ON or OFF by pressing
3
Setting the Temperature
• Press < or > at any time to change the desired temperature value. SET is shown in the display.
• When releasing < or >, the display returns to showing the actual temperature.
• The adjustment step is 0.5° C.
4
Select Away Mode
• Press M to enter Away mode and
• Press < or >. SET appears; set the Away mode setpoint.
• Press M again to exit Away mode.
5
Check Floor Temperature
• Press M and hold. Press < within 6 seconds.
•
flashes and the current floor temperature is displayed. Operate again, then exit (automatic exit after 6
seconds with no operation).
6
Child Safety Lock
• Press M and hold. Press > within 6 seconds to lock all buttons.
• Press again to exit the child safety lock.
2
Danfoss Floor Heating Hydronics
BasicPlus
WT-DM Room Thermostats
2
Symbols
Function description
Away mode
Child safety lock
Power ON/OFF
Mode change/check floor
M
temp./child safety lock/
parameters setting
< >
Up/down selectors
.
will be displayed.
<
>
SET
M
06/2016