Casio 2506 Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Дивись. Casio 2506. Casio 2506 4 сторінки.

Друкувати сторінку

To toggle a city code time between standard time and Daylight Saving Time

1. In the World Time Mode, use B and D to display the

city code (time zone) whose standard time/Daylight

Saving Time setting you want to change.

2. Hold down A for about two seconds to toggle Daylight

Saving Time (DST displayed) and standard time (DST

not displayed).

• The "DST" indicator is on the display whenever you

display a city code for which Daylight Saving Time is

turned on.

• Note that the DST/Standard Time setting affects only the currently displayed city

code. Other city codes are not affected.

• Daylight Saving Time (DST) advances the time setting by one hour from Standard

Time. Remember that the not all countries or even local areas use Daylight

Saving Time.

Telememo

Telememo lets you store up to 20 records, each

Memory number

containing name and telephone number data. Records

are automatically sorted based on the characters of the

name. You can recall records by scrolling through them on

the display.

Name

• See "Character List" for details on how the watch sorts

records.

• Y our watch comes preset with three Telememo records

with the names "FAMILY ," "HOME," and "OFFICE,"

without any phone numbers. You can change or delete

these records if you want.

• All of the operations in this section are performed in the

Telememo Mode, which you enter by pressing C.

Telephone number

To create a new Telememo record

1. In the Telememo Mode, press B or D until a record

showing the name "NEW" (indicating the new record

input screen) appears.

• If the message "FULL" appears on the display, it

means that memory is full. To store another record,

you will first have to delete some of the records stored

in memory.

2. Hold down A until the flashing cursor (

the setting screen.

3. Input a name.

• When inputting the name, use B and D to cycle through characters at the

current cursor location, and C to move the cursor to the right. See "Inputting

Text".

• You can input up to eight characters for the name.

4. After you input the name, press C as many times as

necessary to display the number input screen.

• You can input up to eight characters for the name.

When the cursor is located at the eighth space of the

name, moving the cursor to the right causes it to jump

to the first digit of the number. When the cursor is at

the 12th digit of the number, moving it to the right (by

pressing C) causes it to jump to the first character in

the name.

5. Input a telephone number.

• Use B and D to change the character (hyphen, number, or space) at the cursor

position. The character changes in the following sequence.

Press D.

–

Press B.

6. When the character you want is at the cursor position, press C to move the cursor

to the right.

7. Repeat steps 5 and 6 until you complete number input.

• You can input up to 12 digits for the number.

• The number initially contains all hyphens. You can leave the hyphens or replace

them with numbers or spaces.

8. Press A to store your data and return to the Telememo record screen (without the

cursor).

• When you press A, the message "SORT" appears on the display for a few

seconds. After the sort operation is complete, the watch returns to the Telememo

record screen (without the cursor).

To recall Telememo records

In the Telememo Mode, use D (+) and B (–) to scroll through Telememo records on

the display.

• Only the memory number and name of each Telememo record appear on the display

as you scroll through Telememo records. If you leave the memory number/name

screen on the display for about two seconds, it changes to the phone number

screen.

• Pressing A while the phone number screen is on the display switches to the

memory number/name screen for about two seconds.

To edit a Telememo record

1. In the Telememo Mode, scroll through the records and display the one you want to

edit.

2. Hold down A until the flashing cursor appears on the display.

3. Use C to move the flashing to the character you want to change.

4. Use B and D to change the character.

5. After making the changes that you want, press A to store them and return to the

Telememo record screen.

To delete a Telememo record

1. In the Telememo Mode, scroll through the records and display the one you want to

delete.

2. Hold down A until the flashing cursor appears on the display.

3. Hold down L until the message "CLEAR" appears on the display.

• At this time the cursor appears on the display, ready for input.

4. Input data or press A to return to the Telememo record screen.

USER'S GUIDE 2506

) appears on the display, which indicates

(space)

Stopwatch

The stopwatch lets you measure elapsed time, split times,

1/100 second

and two finishes.

• The display range of the stopwatch is 23 hours, 59

minutes, 59.99 seconds.

• The stopwatch continues to run, restarting from zero

after it reaches its limit, until you stop it.

• The stopwatch measurement operation continues even

if you exit the Stopwatch Mode.

• All of the operations in this section are performed in the

Hours

Seconds

Stopwatch Mode, which you enter by pressing C.

Minutes

To measure times with the stopwatch

Elapsed Time

➤

Start

Stop

Re-start

Split Time

➤

Start

Split

Split release

Two Finishes

➤

Start

Split

Stop

First runner

Second runner

finishes.

Display time

of first

runner.

Reference

This section contains more detailed and technical information about watch operation.

It also contains important precautions and notes about the various features and

functions of this watch.

Auto Return Features

• If you leave a screen with flashing digits or a cursor on the display for two or three

minutes without performing any operation, the watch automatically saves anything

you have input up to that point and exits the setting screen.

• If you leave the watch in Alarm, Day Counter, or Telememo Mode for about two

minutes without performing any operation, it automatically changes to the

Timekeeping Mode.

Data and Setting Scrolling

The B and D buttons are used in various modes and setting screens to scroll

through data on the display. In most cases, holding down these buttons during a scroll

operation scrolls through the data at high speed.

Initial Screens

When you enter the Alarm, Day Counter, World Time or Telememo Mode, the data you

were viewing when you last exited the mode appears first.

Inputting Text

The following describes how to input text in the Alarm, Day Counter, and Telememo

Modes.

To input characters

1. When the cursor is on the display, use B and D to

cycle through the available letters, numbers and

symbols, in the sequence shown below.

Press D.

(space)

Cursor

2. When the character you want is at the cursor position,

press C to move the cursor to the right.

3. Repeat steps 1 and 2 to input the rest of the characters

you want.

Display Text

Though you can input up to eight characters for Alarm text, Day Counter text and the

Telememo name, only six characters can appear on the display at one time. Because

of this, display screens switch alternately between the first six characters and the

remaining two characters.

Timekeeping

• Pressing D while setting the current time in the Timekeeping Mode resets the

seconds count to zero. Pressing D while seconds count is in the range of 30 to 59

resets the seconds to 00 and adds 1 to the minutes. In the range of 00 to 29, the

minutes count is unchanged.

• The day of the week is automatically displayed in accordance with the date (year,

month, and day) settings.

• The year can be set in the range of 2000 to 2039.

• The watch's built-in full automatic calendar automatically makes allowances for

different month lengths and leap years. Once you set the date, there should be no

reason to change it except after you have the watch's battery replaced.

12-hour/24-hour Timekeeping Formats

The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is also

applied in all other modes.

• With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for

times in the range of noon to 11:59 p.m. and the no indicator appears to the left of

the hour digits for times in the range of midnight to 11:59 a.m.

• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, with 24

indicator.

➤

Stop

Clear

➤

Stop

Clear

➤

Clear

Split release

Display time of

second runner.

Press B.

–