Danfoss DEVIreg 531 Посібник з монтажу - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник з монтажу для Терморегулятор Danfoss DEVIreg 531. Danfoss DEVIreg 531 16 сторінок.
Друкувати сторінку
2.
Connect the thermostat according to the connection
diagram.
The screen of the heating cable must be connected
to the earth conductor of the power supply cable by
using a separate connector.
Note: Always install the floor sensor in a conduit in
the floor.
3.
Mount and reassemble the thermostat.
•
Fasten the thermostat to a socket or an exterior
wall box by driving the screws through the holes
in each side of the thermostat.
•
Install the frame and front cover in the reverse
order of disassembly.
4.
Turn on the power supply.
8
N
L
N
L
LOAD
LOAD
Mains
Max. Load
220-240V~
15 (1) A
D531
IP31
-10T30
DEVIreg™ 531
Installation Guide
9