Casio 2599 Посібник користувача - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник користувача для Дивись. Casio 2599. Casio 2599 4 сторінки. Casio
Друкувати сторінку
4. While a setting is flashing, use D, B, and C to change it as described below.
Screen
To do this:
Do this:
Use D (+) and B (–).
Change the hour
A
12:00
• With the 12-hour format, set the time correctly as a.m.
and minutes
(A indicator) or p.m. (P indicator).
Change the
• To set an alarm that does not include a month and/or
x-xx
month and day
day, set
x
Use D (+) and B (–) to cycle through characters at the
Input reminder
#
current cursor location, and C to move the cursor to the
text
right. See "Inputting Text".
• Pressing B and D at the same time while any setting is flashing automatically
sets the time to AM12:00 and the date to
for the alarm.
5. Press A to exit the setting screen.
Alarm on indicator
• If you input reminder text, the text appears in place of
the alarm number. When this happens, you can find out
which alarm's screen is displayed by checking the alarm
number indicator or the snooze alarm indicator.
• If the reminder text is more than three characters, it will
scroll form right to left.
• If the alarm has a month and/or day setting, the month/
day appears in the upper right corner of the display, in
place of the Timekeeping Mode time.
Snooze alarm indicator
Alarm Operation
The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the
watch is in. In the case of the snooze alarm, the alarm operation is performed a total
of seven times, every five minutes, until you turn the alarm off.
• To stop the alarm tone after it starts to sound, press any button.
• If you input reminder text for an alarm, the text appears for one minute on the
Timekeeping Mode screen when the alarm time is reached. You can clear the
reminder text display by pressing A, B, or D, or by exiting the Timekeeping
Mode.
• In the case of the snooze alarm, the reminder text appears on the Timekeeping
Mode screen for the initial alarm operation only.
• Performing any one of the following operations during a 5-minute interval between
snooze alarms cancels the current snooze alarm operation.
Displaying the Timekeeping Mode setting screen
Displaying the
SNZ
setting screen
Changing the DST setting of the Home City code in the World Time Mode
To test the alarm
In the Alarm Mode, hold down D to sound the alarm.
To turn an alarm on and off
1. In the Alarm Mode, use D and B to select an alarm.
Alarm on indicator
2. Press A to toggle it on and off.
• Turning on a alarm (
the alarm on indicator (
• In all modes, the alarm on indicator is shown for any
alarm that is currently turned on.
• The alarm on indicator and applicable alarm number
indicator flash while the alarm is sounding.
• The snooze alarm indicator (
5-minute intervals between alarms.
Alarm number indicator
• In other modes besides the Alarm Mode, alarm number
(Alarm 3)
indicators are displayed for each alarm that is currently
turned on.
To turn the Hourly Time Signal on and off
1. In the Alarm Mode, use D and B to select the Hourly
Time Signal (
2. Press A to toggle it on (
• The Hourly Time Signal on indicator (
the display in all modes while this function is turned on.
Hourly time signal on
indicator
Countdown Timer
You can set the countdown timer within a range of
Timekeeping Mode time
one minute to 24 hours. An alarm sounds when the
countdown reaches zero.
• You can also select auto-repeat, which automatically
restarts the countdown from the original value you set
whenever zero is reached.
• The initial default countdown start time when you
purchase the watch or after you have its battery
replaced is 15 minutes.
• Countdown timer functions are available in the
Countdown Timer Mode, which you can enter using C.
Hours
Minutes
Seconds
To use the countdown timer
Press D while in the Countdown Timer Mode to start the countdown timer.
• When the end of the countdown is reached and auto-repeat is turned off, the alarm
sounds for 10 seconds or until you stop it by pressing any button. The countdown
time is automatically reset to its starting value after the alarm stops.
• When the end of the countdown is reached and auto-repeat is turned on, the alarm
sounds, but the countdown starts again automatically whenever the countdown
reaches zero.
• The countdown timer measurement operation continues even if you exit the
Countdown Timer Mode.
• Press D while a countdown operation is in progress to pause it. Press D again to
resume the countdown.
• To completely stop a countdown operation, first pause it (by pressing D), and then
press B. This returns the countdown time to its starting value.
USER'S GUIDE 2599
for each setting.
. It also clears any text that is input
x-xx
AL1
to
AL4
, or
SNZ
) displays
) on its Alarm Mode screen.
) flashes during the
SIG
).
) and off (
).
ON
OFF
) is shown on
To set up the countdown timer
1. While the countdown start time is on the display in the
Countdown Timer Mode, hold down A until the hour
setting of the countdown start time starts to flash, which
indicates the setting screen.
• If the countdown start time is not displayed, use the
procedure "To use the countdown timer" to display it.
2. Press C to move the flashing in the sequence shown
below to select other settings.
Hours
3. While a setting is flashing, use D and B to change it as described below.
Screen
To do this:
0:15
Change the hours or minutes
RPTOFF
Toggle auto-repeat on (
ON
) and off (
• To specify a countdown start time of 24 hours, set
4. Press A to exit the setting screen.
• The auto-repeat on indicator (
) appears on the display while this function is turned on.
• Frequent use of auto-repeat and the alarm can run down battery power.
Stopwatch
The stopwatch lets you measure elapsed time, split times,
Seconds
and two finishes.
• The display range of the stopwatch is 23 hours,
Hours
59 minutes, 59.99 seconds.
• The stopwatch continues to run, restarting from zero
after it reaches its limit, until you stop it.
• The stopwatch measurement operation continues even
if you exit the Stopwatch Mode.
• Exiting the Stopwatch Mode while a split time is frozen
on the display clears the split time and returns to
elapsed time measurement.
• All of the operations in this section are performed in the
1/100 second
Stopwatch Mode, which you enter by pressing C.
Minutes
To measure times with the stopwatch
Elapsed Time
Start
Stop
Re-start
Split Time
Start
Split
Split release
(
displayed)
Two Finishes
Start
Split
Stop
First runner
Second runner
finishes.
finishes.
Display time of
first runner.
• The time on the screen may not appear to stop immediately when you press a
button to stop timing or to perform a split operation. Despite this, the time recorded
by your button operation is accurate.
Backlight
The backlight uses an EL (electro-luminescent) panel that
causes the entire display to glow for easy reading in the
dark. The watch's auto light switch automatically turns on
the backlight when you angle the watch towards your
face.
• The auto light switch must be turned on (indicated by
the auto light switch on indicator) for it to operate.
• See "Backlight Precautions" for other important
information about using the backlight.
To turn on the backlight manually
Auto light switch on
In any mode, press L to illuminate the display for about
indicator
one second.
• The above operation turns on the backlight regardless
of the current auto light switch setting.
About the Auto Light Switch
Turning on the auto light switch causes the backlight to turn on for about one second,
whenever you position your wrist as described below in any mode.
Moving the watch to a position that is parallel to the ground and then tilting it
towards you more than 40 degrees causes the backlight to turn on.
Parallel to ground
Warning!
• Always make sure you are in a safe place whenever you are reading the
display of the watch using the auto light switch. Be especially careful when
running or engaged in any other activity that can result in accident or injury.
Also take care that sudden illumination by the auto light switch does not
surprise or distract others around you.
• When you are wearing the watch, make sure that its auto light switch is turned
off before riding on a bicycle or operating a motorcycle or any other motor
vehicle. Sudden and unintended operation of the auto light switch can create
a distraction, which can result in a traffic accident and serious personal injury.
Minutes
Auto-repeat
Do this:
Use D (+) and B (–).
Press D.
OFF
)
0:00
.
Stop
Clear
Stop
Clear
Split release
Clear
Display time of
second runner.
More than 40 °
3