Danfoss FH-CWD Інструкція - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція для Терморегулятор Danfoss FH-CWD. Danfoss FH-CWD 16 сторінок.

Instruction FH-CWD Thermostat

Display of Room Temperatures - fig. 3

• The actual room temperature is shown in the display

as default

Setting of Room Temperature Fig. 1 

• Press the

value,

• When releasing the

to actual room temperature

5. Choosing room temperature

control or both room and floor

temperature control

Turn OFF the thermostat by pressing

• Press and hold

will show 01.

• Press

01=room temperature control, only with room

sensor, no floor sensor, check and setting only room

temperature.

02=both room and floor temperature control, with

room sensor and floor sensor, check and setting room

temperature and maximum floor temperature limit.

Factory setting is 01.

Produced by Danfoss Floor Heating Hydronics 05.2011

to set the desired room temperature

is shown in the display.

Fig. 1  for 10 seconds. The display

Fig. 1  to adjust desired controltype.

selector the display returns

Fig. 1 .

VI.CU.B2.02