Acer X1240 Посібник з експлуатації - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Проектор Acer X1240. Acer X1240 9 сторінок. Installation guide
Також для Acer X1240: Посібник з монтажу (20 сторінок)

Друкувати сторінку

1. Setting up a 3D Environment

Using the stereoscopic player

You need to have a stereoscopic player in order to view 3D content. The

instructions below explain how to view 3D content using the Stereoscopic

player that is available at www.3dtv.at. Other players may have different

procedures.

Open the stereoscopic player and set the viewing method by going to View

> Viewing Method > Software pageflipping.

Open the 3D content in the player.

Note: You need to view content at fullscreen resolution in order

to get the 3D effects.

Using 3D glasses

NVIDIA 3D Vision and DLP 3D glasses are powered. In order to enhance battery

life, they turn off after a few minutes of inactivity. Before you can view 3D

content, you need to ensure the glasses are turned on. In many cases, there is a

power switch on one of the arms that you can press, and an LED that indicates if

the glasses are turned on or not.

Note: Refer to the documentation that came with your glasses for

instructions how to turn them on and how to change the battery.