Danfoss RESD-HC4 Посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача для Терморегулятор Danfoss RESD-HC4. Danfoss RESD-HC4 4 сторінки.

Друкувати сторінку
Danfoss RESD-HC4 Посібник користувача
WIRING DIAGRAMS
RESD-HC2
N
V1
L
Hi
Med
Low
OPERATION
On/Off: Press "
Setting temperature: press " " to reduce temperature, press " " to raise temperature (0.5° C changed each press)
set point only valid in current period of time; Clock adjustment, turn on/off or 7 days programming modification, it will
perform new settings.
Note: When 4 periods function On, press " " or "
denote the thermostat will run as per current setting instead of 4 periods setting.
Mode Selection: Press " " to select cooling " ", heating " " or ventilation "
and it will be confirmed automatically after 6 seconds.
Fan speed select: Press "
In mode "
(Auto)", the fan-speed will changed automatically. When: LOW-speed When the difference between
room-temperature and setting-temperature exceed 1° C , Auto MED-speed When exceed ° CAuto HI-speed When e xceed 3° C.
CLOCK CALIBRATION
Clock setting: Press " " till to display "hh:mm" and "hh" flash, press " " or " " to adjust hour, press " ", "mm" flash,
press " " or " " to adjust minute; Press " ", "week" flash, press " " or " " to adjust Mon to Sun.
TIMER ON AND TIMER OFF
Timer on: Press " ", till to display " " and "ON" and all flash, and also "hh" flash, press " " or " " to adjust hour.
Press " ", "mm" flash, press " " or " " to adjust minute.
Timer off: Press " ", till to display " " and "OFF" and all flash, and also "hh" flash, press " " or " " to adjust hour.
Press " ", "mm" flash, press " " or " " to adjust minute.
Canceling timer on: Press " ", till to display " " and "ON" and all flash, and also "hh" flash, press " " or " " to
adjust hour to "--:--". Press " ", "mm" flash, press " " or " " to adjust minute to "--:--".
Canceling timer off: Press " ", till to display " " and "OFF" and all flash, and also "hh" flash, press " " or " " to
adjust hour to "--:--". Press " ", "mm" flash, press " " or " " to adjust minute to "--:--".
85to 260V~ 50/60Hz
N
Value
Fan
" to turn on, press "
" again to turn off thermostat and its output.
" to select "
RESD-HC4
L
" to adjust current set-point, "Override" will show on LCD, it
(Hi),
(Med),
(Low),
Page 2 of 4
85to 260V~ 50/60Hz
N
N
V2
Heating
V1
Cooling
L
Hi
Med
Fan
Low
" modes, the related icon will flash,
(Auto)".
L