Dungs HPSV 10020/604 Інструкція з монтажу Посібник з монтажу

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Блок управління Dungs HPSV 10020/604. Dungs HPSV 10020/604 8 сторінок. High pressure safety shutoff valve

Dungs HPSV 10020/604 Інструкція з монтажу Посібник з монтажу
HPSV 10020/604
High Pressure Safety
Shutoff Valve
Installation Instructions
Table of Contents
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . Page 1
Approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1
Attention . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1
Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2
Installation Position . . . . . . . . . . . . . . . . . . . . . . Page 3
Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3
Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 4
Painting Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 4
Protection from Radiant Heat . . . . . . . . . . . . . . Page 4
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 5
Valve Leakage Test . . . . . . . . . . . . . . . . . . . . . . . Page 6
Flow Curve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7

Approvals

CSA Certified: File No. 1010989
ANSI Z21.21 / CSA 6.5
C/I Marking
CGA 3.9

Attention

Explanation of symbols
1, 2, 3 ...
= Action
= Instruction
1 ... 8
CDN
USA
The installation and maintenance
of this product must be done
under the supervision of an ex-
perienced and trained specialist.
Never perform work if gas pres-
sure or power is applied, or in
the presence of an open flame.
Please read the instruction be-
fore installing or operating. Keep
the instruction in a safe place. You
find the instruction also at www.
dungs.com If these instructions
are not heeded, the result may
be personal injury or damage to
property.
Any adjustment and application-
specific adjustment values must
be made in accordance with
the equipment manufacturers
instructions.
[V] [A]
[Hz] [VA]
Safety
first
O.K.
IFGC
CSA
UL
ANSI
NFPA
Check the ratings in the specifi-
cations verify sure that they are
suitable for your application.
On completion of work on the
safety shutoff valve, perform a
leakage and function test.
This product is intended for instal-
lations covered by, but not limited
to, the following fuel gas codes:
CSA B149.1 (for Canada), the
International Fuel Gas Code, and
NFPA 54 or the following equip-
ment codes and standards: CSA
B149.3 (for Canada) or NFPA 37.
Warning: During normal op -
eration, coil is getting hot. (max.
176 °F / 80 °C)