Danfoss TP5000 RF Si Інструкція з монтажу Посібник з монтажу - Сторінка 8
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Терморегулятор Danfoss TP5000 RF Si. Danfoss TP5000 RF Si 14 сторінок. 5/2 day programmable electronic room thermostat
Також для Danfoss TP5000 RF Si: Посібник з монтажу та інструкція з експлуатації (14 сторінок), Інструкція користувача (2 сторінок)
Друкувати сторінку
- 1. Installation Instructions
- 2. Product Specification
- 3. Installation
- 4. Commissioning (RF Models Only)
- 5. Your Programmable Room Thermostat
- 6. Preset Programmes
- 7. User Instructions
- 8. Before You Start
- 9. Setting the Clock & Day
- 10. Running Your Programme
- 11. Before You Change the Preset Programmes
- 12. Changing the Preset Programmes
- 13. User Overrides
- 14. Frost Protection
- 15. Battery Replacement
User Instructions
GB
Your programmable room thermostat
The TP5000 allows you to programme up to 6 times and
temperatures at which your heating will come on and go off each
day. You can programme one set of times and temperatures for
weekdays and another set for weekends.
It features several user overrides including frost protection,
thermostat mode and time or temperature display.
Preset Programmes
Your TP5000 comes ready programmed with a set of operating
times and temperatures which often suit most people.
Weekdays (Mon-Fri)
Event
1
2
3
4
5
6
If you want to change any of these settings you can do so by
following the instructions on pages 10-11.
First, follow the steps on page 9 to set the correct time and date.
8
Time
Temp °C
06:30
20
08:30
15
11:30
20
13:30
15
16:30
21
22:30
15
Weekend (Sat-Sun)
Event
Time
1
07:00
2
16:00
3
23:00
4
00:00
5
01:00
6
01:59
Temp °C
20
21
15
15
15
15