Danfoss TP7001 series Посібник з монтажу - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник з монтажу для Терморегулятор Danfoss TP7001 series. Danfoss TP7001 series 20 сторінок. Electronic 7 day programmable room thermostat
Також для Danfoss TP7001 series: Інструкція користувача (2 сторінок), Короткий посібник (4 сторінок)
Друкувати сторінку
3.6 The unit can be made tamperproof if required by setting the
DIL switches which will disable the keyboard, and/or the reset
functions. The DIL switches are located on the back of the unit.
SW. No
SW.1
SW.2
3.7 Mount the unit on the wallplate
3.8 With the unit powered up, it is recommended to press and release
the RESET button to start up the TP7001 unit.
4.0 Installer Advanced Programming Options
The TP7001 incorporates a number of advanced features which
can be set by the user. These are accessed via the User Advanced
Programming Mode, please refer to User Advanced Programming
in the User Instructions for details.
The TP7001 incorporates an additional number of advanced features
which can be set by the installer to improve the operating effi ciency
of the system and where required, to change the user functionality
of the product. These are accessed via an Installer Advanced
Programming Mode. These settings are optional and need only be
accessed if there is a demand for the enhanced functions.
4.1 Service Interval Timer
Instructions on how to access this feature are available from our
customer support desk. Please note these are only issued to boni-fi de
heating installers.
Danfoss Heating
OFF
Keyboard Disabled
Reset Disabled
ON
Keyboard Enabled
Reset Enabled
Note: Always switch
the mains off fi rst
and never fi t/remove
the thermostat to/
from a live wallplate.
GB
GB
7