Danfoss APP 46/1780 Посібник з експлуатації - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Водяний насос Danfoss APP 46/1780. Danfoss APP 46/1780 20 сторінок. Disassembling and assembling

Друкувати сторінку

Service guide | Disassembling and Assembling, APP 21 - 46 and APP W HC 15 -30

8 | 180R9406 | AX274339308034en-000302

16. Retainer guide, retainer ball and

retainer plate must be mounted as

indicated in below picture.

19. Place pistons in retainer plate and

cylinder barrel.

When pistons are placed, tilt retainer

plate for easier placement of swash plate.

If swash plate has been disassembled from

mounting flange, see page 10 for assembly

of swash plate.

20. Lubricate piston shoes and swash plate

with clean filtered water. Remember to

place the pins in housing.

21. Place the pins in the housing.

23. Screw in the rest of the bolts and cross

tighten all screws to a torque according to

exploded view.

17. Place retainer plate in cylinder barrel.

Note: If pistons are replaced, place new

pistons in clean filtered water for a

couple of minutes. Exercise piston shoes

to make them "run" smoother.

22. Place the mounting flange.

Remember to place the guide pin in the

housing.

Place three bolts in mounting flange.

Turn each bolt one round at a time to

ensure mounting flange is mounted as

straight downwards as possible. Be careful

not to squeeze O-ring.

24. Place pump horizontally to get access to

shaft.