Dunlop DVP4 VOLUME X Посібник з експлуатації - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Музична педаль Dunlop DVP4 VOLUME X. Dunlop DVP4 VOLUME X 2 сторінки. Mini pedal
Друкувати сторінку
DVP4 VOLUME (X)
DESCRIPTION
• Controls volume and FX pedals with precision
• Patented Low Friction Band-Drive for durable action
• Fully adjustable rocker tension
FEATURES
AUX output for use with a tuner or to control
an FX pedal parameter (toggled by TUNER/
EXP switch)
50 kΩ TRIMPOT (internal) sets FX parameter's
minimum level when using Expression Mode
TIP/RING switch (internal) switch toggles
heel/toe polarity of Expression Mode (set
to TIP by default)
TUNER/EXP switch (internal) toggles AUX
output functionality (set to EXP by default)
MINI PEDAL
™
POWER
The DVP4 does not require a power source to operate.
DIRECTIONS
We recommend placing the DVP4 first in your signal
chain. Run a cable from your guitar to the DVP4's
INPUT jack.
ADJUSTABLE TORQUE
To adjust rocker torque, place pedal in toe-down
position. Insert a 1/4" flat blade screwdriver into
torque-adjust screw located under heel-end of
rocker pedal. Turn clockwise to increase resistance
or counterclockwise to decrease resistance.
VOLUME MODE (250 KΩ POT)
• Run a cable from the DVP4's OUTPUT jack to
your amplifier.
• With the pedal fully toe-down, set your guitar and
amp's maximum desired volume level.
• Moving the rocker toward the heel-down position
decreases output level, muting the signal when fully
heel-down.
•
Optional: To connect a tuner, set TUNER/EXP switch to
the TUNER position and run a cable from the AUX output
to a tuner. Signal to tuner is always active.
EXPRESSION MODE (10 KΩ POT)
• Set TUNER/EXP switch to the EXP position. Run
a stereo or TRS cable from the DVP4's AUX jack
to your FX pedal's expression jack.
• With the pedal fully toe-down, set the FX parameter
you want to control to the desired maximum level.
• Optional: To set the parameter's minimum level, use
internal TRIMPOT. Turn it clockwise to raise minimum
level or counterclockwise to lower it. Factory setting
is fully counterclockwise.
• Move the rocker pedal toward the heel-down
position to lower the FX parameter value within range
set by FX pedal and the DVP4's internal TRIMPOT.
• Optional: Use internal TIP/RING switch to reverse the
DVP4's heel/toe functionality.
DUNLOP MANUFACTURING, INC.
P.O. BOX 846 BENICIA, CA 94510 U.S.A.
TEL: 1-707-745-2722 FAX: 1-707-745-2658