Danfoss 176F4045 Посібник з монтажу - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник з монтажу для Конвертер мультимедіа Danfoss 176F4045. Danfoss 176F4045 16 сторінок. In-back/out-back cooling kit for fa09-fa10, frequency converters

Друкувати сторінку

In-back/Out-back Cooling Kit for FA09-FA10

Installation Guide

74 (2.9)

8x Ø 6 (0.2)

2x Ø 8 (0.3)

Mounting Holes

29 (1.1)

4x Ø 7 (0.3)

Illustration 4: FA10 Mounting Plate Template for In-back/Out-back Cooling

2.4 Preparing the Backplate

To create vent openings in the cabinet backplate to match the openings in the mounting plate, use the following steps. Refer to

Illustration 5

for FA09 frequency converters and

Procedure

Cut out the vent openings in the cabinet backplate using the dimensions in the FA09 or FA10 template.

The openings must match the mounting plate openings.

Drill screw holes (6 mm) around the vent openings.

The FA09 requires 6 holes around each vent opening, and the FA10 requires 8 holes around each. The holes must align

with the holes in the outer flanges of the ducts.

321 (12.6)

280 (11.0)

271 (10.7)

16 (0.6)

295 (11.6)

328 (12.9)

Illustration 6

for FA10 frequency converters.

2x Ø 8 (0.3)

Mounting Holes

110 (4.3)

130 (5.1)

10 (0.4)

1051 (41.4)

896 (32.3)

140 (5.5) 180 (7.1)

AN371942471353en-000101 / 136R0248

Installation