Casio WVA-107HD-2AV Посібник з експлуатації
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Дивись. Casio WVA-107HD-2AV. Casio WVA-107HD-2AV 5 сторінок.
Друкувати сторінку
MO0612-EA
Operation Guide COMBIWVGE1
About This Manual
• The operational procedures for Modules 2734, 2758, 3748, 3749, 4773, and 4774
are identical. All of the illustrations in this manual show Modules 2734 and 2758.
• Button operations are indicated using the letters shown in the illustration.
Modules 2734 and 2758
• Each section of this manual provides you with the information you need to perform
operations in each mode. Further details and technical information can be found in
the "Reference" section.
General Guide
• Press C to change from mode to mode.
• In any mode, press B to illuminate the display.
Timekeeping Mode
Radio-controlled Timekeeping
Hour hand
Minute hand
Day of week
Month – Day
• When using the watch that is outside of the range of the transmitters in Rugby and
Mainflingen, you need to manually adjust the time as required. See "Timekeeping"
for information about manual settings.
• The analog time of this watch is synchronized with the digital time. Because of this,
the analog time setting is automatically adjusted whenever you change the digital
setting. See "Analog Timekeeping" for more information.
To set your Home City
City code
• The following are the city codes for major cities in the Western Europe time
zones.
LON
: London
PAR
and
BER
: Paris, Berlin, Milan, Rome, Amsterdam, Hamburg, Frankfurt,
Vienna, Barcelona, Madrid
4. Press A twice to exit the setting screen.
• The first press of A displays the 12/24-hour setting screen. Pressing A again exits
the setting screen.
Important!
• Normally, your watch should show the correct time as soon as you select your Home
City code. If it does not, it should adjust automatically after the next auto receive
operation (in the middle of the night). You can also perform manual receive or you
can set the time manually.
• If you are in an area that does not use Daylight Saving Time (summer time), turn off
the DST setting.
• See "Transmitters" for details about the transmitter indicator.
Time Calibration Signal Reception
There are two different methods you can use to receive the time calibration signal:
auto receive and manual receive.
• Auto Receive
With auto receive, the watch automatically picks up the time calibration signal five
times a day at 0:00 a.m., 1:00 a.m., 2:00 a.m., 3:00 a.m., and 4:00 a.m. For more
information, see "About Auto Receive".
• Manual Receive
Manual receive lets you start a time calibration receive operation with the press of a
button. For more information, see "To perform manual receive".
Modules 3748 and 3749
Modules 4773 and 4774
World Time Mode
Press C.
Hand Setting Mode
This watch receives a time calibration signal and update
its time setting accordingly. The time calibration signal
includes both Standard Time and Daylight Saving Time
(summer time) data.
• This watch is designed to pick up the time calibration
signal transmitted from Rugby, England and the signal
from Mainflingen, Germany.
Current Time Setting
This watch automatically adjusts its digital time setting in
accordance with a time calibration signal. You can also
perform a manual procedure to set the time and date,
when necessary.
• The first thing you should do after purchasing this watch
is to set your Home City, which is the city where you will
normally use the watch. For more information, see "To
set your Home City" below.
1. In the Timekeeping Mode, hold down A until the
transmitter indicator (
A/T
,
MSF
, or
DCF
flash, which indicates the setting screen.
• If the displayed transmitter indicator shows something
, use D to display
other than
A/T
A/T
advancing to the next step.
2. Press C to display the city code setting screen.
3. Use D (east) and B (west) to select the city code you
want to use as your Home City.
Alarm Mode
Stopwatch Mode
Important!
• Position the watch as shown in the nearby illustration, with its 12 o'clock side facing
towards a window. Make sure there are no metal objects nearby.
Resin Band
• The watch should not be on its side or facing the wrong way.
• Proper signal reception can be difficult or even impossible under the conditions listed
below.
) starts to
Inside or
Inside a
among
vehicle
buildings
before
• Signal reception is normally better at night than during the day.
• Time calibration signal reception takes from two to five minutes, but in some cases it
can take as long as 12 minutes. Take care that you do not perform any button
operations or move the watch during this time.
1,500 kilometers
Rugby
500 kilometers
• At distances further than about 500 kilometers from a transmitter, signal reception
may not be possible during certain times of year or times of day. Radio interference
may also cause problems with reception.
• Even when the watch is within the reception range of the transmitter, signal
reception is impossible if the signal is blocked by mountains or other geological
formations between the watch and signal source.
• Signal reception is affected by weather, atmospheric conditions, and seasonal
changes.
• See the information under "Signal Receive Troubleshooting" if you experience
problems with time calibration signal reception.
Date Alert Mode
Time Recorder Mode
Metal Band
Near
Near a
Near high-
household
construction
tension
appliances or
site, airport, or
power lines
office
other sources
equipment,
of electrical
or a mobile
noise
phone
Mainflingen
Among or
behind
mountains
1