Dunster House ATLAS P5-3050PRG Посібник з монтажу - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з монтажу для Садові будиночки Dunster House ATLAS P5-3050PRG. Dunster House ATLAS P5-3050PRG 16 сторінок. Pergola 3.2m x 5.2m
Друкувати сторінку**Avoid splitting timber parts by pre-drilling all screw holes**
12x
45x140x630.A
6x
70x70x55mm Bracket
24x
M10x120mm Hex Head Screws
•
Make sure your posts are level vertically (use a spirit level).
Step 3.
•
Use a tape measure to check the distance of the top and bottom diagonals (4 diagonals in total).
•
Make sure they are all the same before continuing with installation.
•
If they are different, slightly move posts to make all diagonals equal (A=B on the top and on the bottom of posts).
•
If you have bought Atlas Single Carport/Garage or optional wall panels for your Pergola, please
refer to the instructions provided at the end of this manual to find out how to install the panels.
•
You will need to fix these in place now.
•
If you have bought Atlas Single Garage, please refer to the instructions provided with garage door
wall pack to assemble door.
•
Measure diagonals to check for squareness. Check Posts and Beams to make sure they are plumb
and level !!
•
Fix 70x70x55 Brackets to Posts using (4x) 35mm screws.
•
Secure the Pergola Posts to the ground using 70x70x55 Brackets. (Fixings not supplied)
•
Fix (2x) 45x140x630.A Brace to each Post using (2x) M10x120
Assembly Steps for Atlas Pergola 5.2m x 3.2m
24x
24x M10 Washer
24x
35mm Screws
45x140x630.A
M10 x 120mm Hex head screw
4x- 45x140x2600.B
35 mm Screws
Page 5