Dunster House Vantage 250 Посібник з монтажу - Сторінка 14
Переглянути онлайн або завантажити pdf Посібник з монтажу для Садові будиночки Dunster House Vantage 250. Dunster House Vantage 250 15 сторінок. Hexagonal summerhouse 2.5m x 2.1m
Друкувати сторінку
10B.iv: Ridges
Cut the shingle unit into 3 parts as shown below with taper (approximately 15°).
Cutting lines
Cover the ridges with the cut shingle parts ensuring there are no gaps to let in rain water.
Step 11: Roof Decoration
Item: 1x Roof Metal Cover
1x Ball
6x 35mm Screws
All dimensions are approximate and subject to the limitations of the material used and the methods of manufacture. Page-12
Vantage 250 Hexagonal Summer House
Before
Ball
Roof Metal Cover
Bolt (Provided with the ball)
35mm screw (Pre-drill holes)
11A
35x35x2335(Temp. Post)- Please remove after fixing metal cover
After
You can trim the edges to match the roof.
11B