Dunster House H3-GS4X35HEX Посібник з монтажу - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник з монтажу для Притулки Dunster House H3-GS4X35HEX. Dunster House H3-GS4X35HEX 17 сторінок. Hexagonal utopia garden shelter

Друкувати сторінку

To avoid splitting timber, please pre-drill all holes before screwing throughout the installation.

Start by assembling the main frame for the Utopia Garden Shelter.

At the notched end of Wall posts (86x65x1810.A) fix Triangle support 76x70 and Roof supports (70x35x1961.A) in

the positions shown using 2x 70mm screws per end. Ensure that the notch is facing inwards in all 6 corners before fixing

and the top of the wall posts, edge of the roof support and top of the triangle support are flush.

We recommend to secure the garden shelter legs to the ground using metal brackets, metal connectors etc. (not supplied).

Flush

70mm Screws

Position Triangle supports 76x70

approximately 428mm from the top end

of the wall post as shown, then fix the

Post braces (2x 70x35x650.C) in the

positions shown using 3x 70mm screws

and 1x 90mm screw per component.

70mm Screw

90mm Screw

70mm Screws

All dimensions are approximate and subject to the limitations of the material used and the methods of manufacture

Installation Manual for Utopia Garden Shelter

Step 1 - Assembling shelter frame

Triangle support

70x35x1961.A

86x65x1810.A

Step 2 - Fixing Post braces

Triangle support

Page 5