Dunster House MONKEY BARS Посібник з монтажу - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник з монтажу для Ігрові набори та обладнання для дитячих майданчиків Dunster House MONKEY BARS. Dunster House MONKEY BARS 10 сторінок. Monkey bars
Також для Dunster House MONKEY BARS: Посібник з монтажу (16 сторінок)
Друкувати сторінкуMaintenance of the Monkey Bars is very important and should be carried out at the beginning of each season, as
well as at regular intervals during usage, to ensure that the Monkey Bars remains safe. Failure to carry out these
checks could cause the Monkey Bars to overturn or become a hazard.
The points you should check to maintain this climbing frame include the following:
-Check all nuts and bolts for tightness and tighten when required. If they have sheared, replace them.
-Check all screws to ensure they have not sheared and replace when necessary.
-Oil all mechanical moving parts, e.g. Swing hooks.
-Check all anchors are secure and tighten or replace if required. If the ground anchors are pulling out of the soil,
dig them in again and cover them with concrete.
-Check the main structural pieces of wood for evidence of deterioration and replace when required. Please note
that cracks will naturally appear in the wood and should not affect the structural strength of the Monkey Bars.
-Check all means of attachments for evidence of deterioration and replace if required.
-Remove swinging ancillaries when not in use to avoid damage by abnormal weather conditions.
In addition to these points, to keep your climbing frame looking good, you can also apply a wood stain/preservative
periodically if desired. Make sure it is compatible with tanalith 'E' pressure treated timber.
2 of
15 of
4 of
2 of
2 of
4 of
2 of
2 of
2 of
2 of
4 of
4 of
4 of
4 of
8 of
4 of
14 of
4.8x95mm countersunk screw
34 of
5x70mm countersunk screw
60 of
4x50mm countersunk screw
3 of
3x20mm long screw
Please note: You may have some fixings left over as we provide extra.
Assembly Instructions for Monkey Bars
Please retain these instructions for future reference.
Components (Sizes in mm)
C4034A - 70x35x415
C4038A - 44x44x550 - rungs
C40138B - 86x43x2225
C40239A - 86x43x2350
C40295A - 70x35x1900
C40296A - 70x35x1300
C40310A - 70x35x1010
C40311A - 70x35x980
C40299A - 70x35x345
C40309A - 70x35x633
M10x70mm hex head screw
M10x100 coach bolt, square shoulder
M10 nut
M10x30mm washer
M10x20mm washer
Claw washer
4 of
Green 10mm cap
4 of
Ground anchor
1 of
Flag
4 of
10mm dowel
Page 3