Dunster House PS 709 Посібник з монтажу - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник з монтажу для Ігрові набори та обладнання для дитячих майданчиків Dunster House PS 709. Dunster House PS 709 16 сторінок.

Друкувати сторінку
STEP
4
- ATTACHING GROUND ANCHORS
Required Components
GROUND ANCHOR
1X PER ATTACHMENT POINT
2
Note:
•
Fit Ground Anchors to the corners of
the Play System as per drawing.
•
Secure using bolt assembly as shown.
Note:
•
A hole will need to be dug for each anchor (for locations of ground anchors see above diagram). The disc end of
the ground anchor needs to be placed in the dug hole.
•
When the anchors are firmly attached to the climbing frame, fill the holes with compacted soil. If you find that the
soil does not hold the anchors in place sufficiently when the tower is in use, concrete will need to be used to
secure them.
Assembly Instructions
BOLTS
4x
65mm
1
M10x30mm Washer
M10x30mm Washer
Green 10mm Cap (Base)
M10 Nut
Green 10mm Cap (Top)
M10x20mm Washer
Fill with Compacted Soil or
Concrete if necessary.
Claw Washer
M10x65mm Square Shoulder
Coach Bolt
Page 13