DuoCounty MyDuo Roku TV Service Інструкція з монтажу
Переглянути онлайн або завантажити pdf Інструкція з монтажу для Аксесуари для телевізорів DuoCounty MyDuo Roku TV Service. DuoCounty MyDuo Roku TV Service 2 сторінки.
Друкувати сторінкуRoku TV Service
Installation Instructions
Setting Up Your Roku Player:
Step 1 – Connect to your TV
• Simply connect one end of the HDMI cable to the
HDMI port on the Roku player, and the other end
to an available HDMI input on your TV. Be sure to
make note of the TV input used.
Step 2 – Power up key components
• Install the batteries on the Roku remote. (Note:
the front LED lights on the remote will flash
indicating it is ready to pair to your Roku player.)
• Power up the Roku player by connecting the
provided power adapter to the Roku player and to
an available wall outlet.
• Turn on your TV and select the correct TV input.
• Note that during the start-up process, the Roku
remote will automatically pair to your Roku player
(the front LEDs will stop flashing.)
Step 3 – Connect to your network
• For best results, connect your Roku player via the
Ethernet port (Roku 3 only).
• For wireless setup, it is important to place your
Roku player within range of your wireless
network (remember, closer is better). Also
don't place your Roku player in any type
of enclosed cabinet as it may interfere with the
wireless signal.
Russell: 270-343-3131
Thank you for subscribing to MyDuo Roku TV service,
a great new way to access your local channels via
your Duo County Telecom Internet connection.
Technical Support:
Should you require assistance with your MyDuo Roku TV
Service, please don't hesitate to contact Duo County Telecom.
Important Note:
Please be advised that your MyDuo Roku TV service is only
authenticated for use within Duo County's Internet network.
If you move your Roku player to another Internet connection
outside of Duo County, your MyDuo Roku TV Service will not work.
Adair: 270-378-4141
Ethernet (wired) – Recommended setup:
• Plug an Ethernet cable into an available port on
the back of your DSL modem/router and the other
end into your Roku player.
• Select "Wired" as your network connection in the
settings menu on your Roku player.
Wireless:
• Select "Wireless" as your network connection
and select your network from the list of available
networks in the settings menu on your Roku player.
• Enter your wireless network password when
prompted. (Note: passwords are case-sensitive)
Cumberland: 270-433-2121
page 1 of 2
duocounty.com