AudioCodes GW & E-SBC Series Примітка до конфігурації - Сторінка 17

Переглянути онлайн або завантажити pdf Примітка до конфігурації для Шлюз AudioCodes GW & E-SBC Series. AudioCodes GW & E-SBC Series 20 сторінок.

Configuration Note

4.4

Mediant 1000 MSBG and Mediant 1000B GW & E-

SBC

The procedure below describes how to reset the Mediant 1000 MSBG and Mediant 1000B

Gateway & E-SBC to default settings using the hardware reset button.



To restore Mediant 1000 MSBG and Mediant 1000B Gateway & E-SBC to factory

defaults:



With a paper clip or any other similar pointed object, press and hold down the reset

button (located on the CRMX module) for at least 12 seconds, but no longer than 25

seconds.

Figure 4-6: Reset Pinhole Button on Mediant 1000B Gateway & E-SBC Front Panel

Version 6.4

4. Restoring Defaults using Hardware Reset Button

May 2012