Duolabs Qbox One Короткий посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Короткий посібник користувача для Приймач Duolabs Qbox One. Duolabs Qbox One 15 сторінок. Dvb-s sat receiver

Before initial operation on the receiver
Safety instructions
Please read the safety instructions completely and carefully, before using the Q-Box. The Manufacturer
takes no responsibility for damages as a result of incorrect handling of the QBox.
- The safety marking is located on the exterior of the bottom of the apparatus.
- The mains plug shall be installed near the equipment and shall remain readily operable.
- Allow enough space around the QBox for sufficient ventilation.
- Do not cover the top of the QBox and allow enough space to other devices. The louvers of the devices
must be free at all times to allow sufficient heat transfer from inside the device.
- Never put vases or any other liquid filled containers on top of the device. Do not expose the device to
dripping or splashing liquids.
- Do not place open flame sources, such as lit candles, on top of the device. -The device may only be
operated in moderate climate.
- Do not remove the cover. Risk of electric shock. If it is necessary to open the device please contact a
trained professional.
-Do not put any metal things into the slots or ventilation openings.
-The installation of a hard disk is only allowed by skilled personal or your local dealer.
Modifications and changes to the QBox lead to loss of warranty if not
performed and documented by skilled personal.
We recommend the installation of a hard disk by your local dealer.
Unskilled installation of a hard disk leads to loss of warranty.
Shut down
- In case your QBox is not in use for a long period of time disconnect the power plug from the power outlet.
- During thunder storm the unit should also be physically disconnected from the power outlet.
Additional safety instructions
- (Dis-)Connecting to a LNB: Turn the QBox off before you connect or disconnect a cable coming from or
going to a LNB.
- Connecting to a TV: Before connecting or disconnecting your QBox to/from a TV please turn it off.
- In case you notice any damage to the power cord or power plug immediately disconnect the device from the
power outlet.
- In case the device was exposed to humidity immediately disconnect the device from the power outlet.
- In case you notice any serious damage to the outer shell of the device immediately disconnect the device
from the power outlet.
- Do not expose the QBox to direct sunlight, lightning or rain.
- Grounding: The LNB cable must be grounded. The grounding system must meet SABS 061 requirements.
- Cleaning: Disconnect the mains power cord before cleaning the cover. Use a slightly damp cloth without
cleaning agents.
- Connect the QBox only to suitable sockets. Do not allow overloads to occur.
- Please be careful that the batteries of your remote control are not exposed to heat, since they might
explode.