Free The Tone PA-1QA Посібник користувача - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник користувача для Стерео еквалайзер Free The Tone PA-1QA. Free The Tone PA-1QA 9 сторінок. Programmable analog 10 band eq graphic equalizer
Також для Free The Tone PA-1QA: Посібник (16 сторінок), Посібник із швидкого старту (2 сторінок), Посібник користувача (6 сторінок)
Друкувати сторінку
Thank you for choosing a Free The Tone product.
In order to take full advantage of the features and performance it provides, please read this owner's
manual thoroughly and keep it in a safe place for future reference.
Table of Contents
Controls and Indicators
Front Panel
Rear Panel
Adjusting Equalizer
Adjusting the equalizer
Adjusting a preset's volume
Recalling a Preset
Switching between presets 1-4
Switching between presets 1-99
Switching presets via MIDI
Changing/writing preset contents
Configuring MIDI settings
Setting a MIDI receiving channels
Handling Precautions
• Never connect or disconnect plugs to/from the input/output terminals on the this unit when the external device
that drives speakers is powered. Doing so can cause noises and damage the speakers.
• Avoid applying excessive force to the footswitches, tact switches, and DIN connector on the this unit.
• If the unit malfunctions or behaves erratically, cease operation at once and contact your local dealer or Free The
Tone directly.
3
Receivable MIDI Messages
Correspondence between presets and
3
MIDI program change numbers
4
Correspondence between parameters and
5
MIDI control change numbers
5
5
Initializing
6
Transmitting Data to/from an External Device
6
Updating Firmware
6
Factory Presets
6
Product Specifications
7
Safety Precautions
7
7
Controls and indicators
Front panel
PRESET display
Shows the number for the
currently recalled preset.
8
8
PRESET tact switch
9
Pressed when recalling a preset.
Recalling a Preset →P.6
10
10
10
11
14
15
Equalizer display
Shows the currently recalled preset'
equalizer status or preset's volume.
Adjusting Equalizer →P.5
Adjusting Preset's Volume →P.5
EFFECT ON/OFF switch
Pressed to turn on/off the equalizer
effects. The LED above the switch
illuminates when the switch is
turned on.
LEVEL display
PARAMETER encoder
Shows the boost amount of the selected
Turned when adjusting the boost
frequency or volume for the preset.
amount of the selected frequency or
Adjusting Equalizer →P.5
the volume for the preset.
Adjusting Preset's Volume →P.5
Adjusting Equalizer →P.5
Pressed when confirming the
operation to save parameters in a
preset.
Editing/Writing Preset Contents → P.7
◀▶
Selects the frequency or
volume to be adjusted.
Adjusting Equalizer →p.5
SAVE switch
Pressed when saving
parameters in a preset.
Editing/Writing Preset Contents
→ P.7
PRESET switch
Pressed when switch presets 1–4. Each press selects
the preset as follows: PRESET-1
→
→
PRESET-3
PRESET-4
Recalling a Preset →P.6
cursor key switch
→
→
PRESET-2
PRESET-1 ...
3