DUOVAC A10-260I-NA Посібник користувача - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача для Центральні пилососні системи DUOVAC A10-260I-NA. DUOVAC A10-260I-NA 10 сторінок.

Друкувати сторінку

Connect the control module (see section 6)

6�

Install the muﬄ er (optional);

7�

Connect the power unit directly into an electrical outlet;

8�

MUFFLER (OPTIONAL)

The installation of a muﬄ er is optional. Its purpose is to reduce the sound emitted by the

system. To install a muﬄ er on your power unit, follow these simple steps:

Turn off and unplug the unit;

1�

Attach the 90° long elbow upwards or downwards onto the central vacuum outlet;

2�

Secure the muﬄ er onto the elbow:

3�

• If the inlet pipe of the muﬄ er is made of PVC, secure the muﬄ er onto the PVC elbow

using a PVC solvent glue;

• If the inlet pipe of the muﬄ er is made of metal, secure the muﬄ er onto the metal elbow

using the provided self-tapping screw;

OPTIONAL - If you plan on exhausting the central vacuum outside, install more piping

4�

starting from the other end of the muﬄ er.

5. FLEXIBLE HOSE WITH ERGONOMIC HANDLE

6. LOW VOLTAGE WIRE CONNECTION

Fig. 4

Low voltage wire connection

7. SYSTEM OPERATING INSTRUCTIONS

Your new system is ready to be used, here are some simple guidelines to follow when using your

power unit:

• Insert the fl exible hose in one of the wall or fl oor vacuum inlets installed in your home;

• If you use a hose fi tted with a remote switch on the handle, use the interrupter on the

hose's handle to turn the power unit on/off .

6 | DOC-568_EN REV04

At Duovac, we understand that your cleaning

experience with a central vacuum system

begins above all with the use of the fl exible

hose and accessories. This is why we off er

products above market standards, on top of

having unequalled advantages like the best

warranty in the industry.

Fig. 3

Low voltage technology handle

Before connecting the low-voltage wires,

make sure that the power unit is disconnected

from the electrical outlet.

First, strip the low voltage wires

1�

approximately 3/8in / 10mm.

Refer to Fig. 4 for visual aid:

2�

• 2a: The power unit is an EZ connector-type,

leave the wires stripped.

• 2b: The power unit is a PIN connector-type,

you must crimp the connectors onto the wires

in order to hook-up the system.

direction of the exterior vent� The 90° elbow is

not mandatory�

In case of space restriction around the power

unit, install the muﬄ er at any convenient

distance�

full length of the Distinction (2 serial-mounted motors)

central vacuum exhaust piping.

Fig. 2

Installing the mu er.

Your Duovac fl exible hose comes with a uniquely designed ergonomic handle, which makes its

use pleasant and worry free.

In your Duovac hose handle, you will fi nd the same quality, durability and solid design made

with fi rst-quality materials. The top-of-the-line fi nish of your Duovac fl exible hose is perfectly

harmonized with a series of accessories chosen by Duovac to make a perfect cleaning kit. The

performance, simplicity and durability are the three principles which led to the development

of your Duovac accessory kit. We are convinced that your cleaning experience will be improved

by it.

Insert the low-voltage wires into the power unit's low voltage terminal. Slightly pull on

3�

the low-voltage wires to verify that they are properly fastened to the terminal.

To remove the wires:

4�

• 4a (EZ connector): Gently press the tabs above each terminal with a screwdriver and pull

the wires out.

• 4b (PIN connector): gently pull the connector out of the socket.

ORIGINAL INSTRUCTIONS

NOTE

The muﬄ er can be oriented in the

IMPORTANT

DO NOT use any plastic piping (e.g. PVC) along the