Duplo DBM-120 Посібник з монтажу - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник з монтажу для Фальцювальні машини Duplo DBM-120. Duplo DBM-120 12 сторінок. Connecting kit
model: dc-6000s;dc-8000s 2;
dc-10000s
Також для Duplo DBM-120: Посібник з монтажу (13 сторінок)
Друкувати сторінку
6
Check that the paper in-feed slot of this
unit and the center of the paper ejection
guide of the DSF-2000 are of the same
height.
NOTE
: As the above range will not be satisfied if
the ground is not flat, check that the
ground is flat.
7
Insert one plug of the connecting cable 1
provided into D-PORT connector 2 of the
DSF-2000, and the other end into
D-PORT connector 1 of this unit.
NOTE
: Use the DUPLO connecting cable
(marked STYLE 20276) only.
<< Parts to be used >>
Connecting cable 1 !1 ........................................ 1
2. INSTALLATION PROCEDURE
DBM-120 Sheet by Sheet
Guide
<DSF-2000>
D-PORT
connector 2
Connecting
cable 1
Paper ejection guide of
DSF-2000
<DBM-120 Sheet by Sheet>
D-PORT
connector 1
Connecting
cable 1
5