Freedom Charge FDMC-1260 Інструкція з монтажу
Переглянути онлайн або завантажити pdf Інструкція з монтажу для Автомобільні аксесуари Freedom Charge FDMC-1260. Freedom Charge FDMC-1260 5 сторінок. 2009 - current ram truck qi wireless charging kit
Друкувати сторінку
2009 – Current Ram Truck Qi Wireless Charging Kit
Please read thoroughly before starting installation and check that kit contents are complete.
Items Included in the Kit:
Q i Wireless Charging Module with
Ram Specific Substrate and Mat
Power Harness with 3 amp Fuse
2 – Flat Head Torx 1" Screws
These Instructions with Template
Removable Consumer Product Label
*Note this product is designed to work with Qi compatible devices. Please confirm that
your device is Qi compatible before installation. Visit
compatibility guide.
Safety Precautions:
Work in well ventilated area that is clear of obstructions.
●
Secure vehicle with tire chucks in both front and rear of tires.
●
Turn vehicle accessories OFF and ensure ignition key is in OFF position.
●
Wear safety goggles and snug fitting clothes.
●
Use tools only for their intended purpose and which are in good repair.
●
Only perform this task if confidence, skill, and physical ability permit.
●
NOTE: We strive to provide accurate and up-to-date installation instructions.
1260 Instructions 3-15-18.docx
I NSTALLATION INSTRUCTIONS
(Kit # FDMC-1260)
Tools & Supplies Needed:
P lastic Trim Removal Tool
T-10 Torx Driver
Phillips Screwdriver
Center Punch/Scribe Tool
Power Drill
1/8'' and 1/2" Drill Bits
Soldering Iron & Solder
Tape or Heat Shrink Electrical Tubing
Page 1 of 5
( Recommended)
w ww.brandmotion.com
for phone