Freedom ELECTRONICS Ovation 2 FE-24 Посібник з монтажу - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник з монтажу для Принтер Freedom ELECTRONICS Ovation 2 FE-24. Freedom ELECTRONICS Ovation 2 FE-24 10 сторінок.
Друкувати сторінку
FE-24 Printer
1. Before you begin work, read and
understand the Important Safety
Information above.
2. Open the dispenser door by unscrewing
the two locks on the door.
3. Remove power to the Ovation 2
dispenser.
4. Use the latch on the side of the printer
bracket to slide the printer/bracket back.
5. Disconnect the printer power, data and
low paper sensor(if applicable) from the
printer.
6. Remove the DW-14 or Zebra printer by
sliding it to the right.
7. Carefully snip the zip tie in the back and
under the printer paper bucket to free the
cables.
Freedom Electronics: FE-24 Install
4