Duplo DocuCutter CC-228 Посібник з експлуатації - Сторінка 16

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Різаки для паперу Duplo DocuCutter CC-228. Duplo DocuCutter CC-228 17 сторінок.

CUT MARK

The purpose of cut mark is to compensate horizontal cut due to image shifting during printing. Refer to

page 11 for cut mark printing.

Hold

and press

mark on the display.

1. Hold

for 4 seconds.

2. Press

to select "Normal Mode" or "Turbo Mode".

3. Press

to save settings.

1. The cutter provide the waste bin full warning feature when cutting count is reached to 150, the

cutter will stop and " Waste Bin Full" will be displayed.

2. Empty the waste Bin and restore.

3. Press

to clear the warning.

4. Press

to continue the cutting job.

Hold

and

In case jam occurs in the machine follow these steps to clear jam.

1. Power off then pull out jam paper toward feeding tray.

2. Press

to move the jam piece toward the exit.

to enable or disable cut mark. This will toggle (M) for mark and (N) for not

simultaneously to reset counter to 0.

Page 16