Freedom Innovations Plie3 MPC Knee Інструкція з використання Посібник з використання - Сторінка 9
Переглянути онлайн або завантажити pdf Інструкція з використання Посібник з використання для Медичне обладнання Freedom Innovations Plie3 MPC Knee. Freedom Innovations Plie3 MPC Knee 10 сторінок.
Друкувати сторінку4.5 Plié Control 6
The Plié Control 6 software is required to program a Plié 3 MPC Knee. Download software from
the CD provided with the knee or from the Freedom Innovations website to install the program
at
https://www.pliesupport.com/download.
4.6 Plié 3 Setup
Thoroughly read and follow the instructions as stated in the Prosthetist Setup Guide and Plié
Setup Wizard to set up and program the knee. Utilize the "Help" function in the Plié Control
software to assist any issues that may arise.
4.7 Finishing Options
4.7.1 A discontinuous, two-piece cover is recommended for cosmetic finishing. Care should
be taken to ensure that the battery compartment and manual adjustments are
accessible. See catalog for Cosmetic Cover Kit.
4.7.2 For individuals who prefer a one-piece skinned cover, a remote access battery pack can
be purchased from Freedom Innovations. See catalog for One Piece Skin Cover
Accessory Kit.
4.8 Technical Support
For Technical Support, please contact Freedom Innovations toll-free at 1-888-818-6777.
5.
Warranty and Service
The Plié® 3 MPC Knee purchase includes a 36 month warranty covering all manufacturer
defects effective only if the product is used according to manufacturer recommendations. The
batteries, battery charger, and accessories are provided with a 12 month warranty. An
extended warranty is available. See product catalog for details.
5.1 Service and Repair
For the warranty to remain in effect, the knee must be serviced 12 and 24 months after
purchase. For knee service or repair, please contact Freedom Innovations toll-free at 1-888-
818-6777. A loaner knee will be provided upon request. For service and/or repair, please ship
the knee in the provided shipping case to the following address:
Freedom Innovations
425 East 400 North (PO Box 50)
Gunnison, UT 84634
6.
Technical Specifications
6.1 Device Information
Product weight (pyramid top):
Product weight (threaded top):
Build clearance (pyramid top):
Build clearance (threaded top):
Maximum flexion angle:
R-720-190 Rev. E English
European Head Office
Jaargetijdenweg 4
7532 SX Enschede
The Netherlands
Approximately 1235 g or 2.7 lbs.
Approximately 1243 g or 2.74 lbs.
Approximately 9.25" or 235mm
Approximately 8.75" or 223mm
125° (pyramid top) and 117° (threaded top)
9