Dangerous Music 2Bus LT Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач Dangerous Music 2Bus LT. Dangerous Music 2Bus LT 11 сторінок.

Overview

The 2Bus LT is a 16x2 summing amplifier designed to help the users of digital audio

workstations achieve better mix performance through the use of existing equipment in

their studios. The designers and their colleagues have noted that while DAWs offer

unprecedented flexibility in multitrack recording and editing, the resulting mixes from

these systems generally don't equal those of high-end analog recording systems in terms

of sound quality, preservation of spatial detail, and 'no latency' ergonomics. In today's

portable environment and with the cost of maintaining and housing legendary recording

equipment, the choice of a big desk is impractical for many users of DAW systems. We

want to bring together the best of both worlds. It is in this spirit that the Dangerous

engineering team is designing and manufacturing an exciting array of summing, mixing,

monitoring, metering, and mastering equipment to meet the needs of today's recording

engineers, producers, and artists.

Hook up

The 2Bus LT is designed to mix the outputs of two eight channel D/A converters to a

stereo recorder (16x2). The 2Bus LT is easily stackable to increase channel numbers and

system functions when linked with another 2Bus LT, Mixer, Monitor, or 2Bus. All the

XLR's are pin 2 hot and the connector groups are described as follows:

EXPANSION IN

IN 1-8, IN 9-16

REMOTE ONLY

DC IN

MAIN OUT

MON OUT

Patch from the Main Output of a 2Bus, LT, or Mixer to sum into

the mix bus.

The inputs are arranged into eight sets of XLR's. They can be

plugged into directly from the D/A converters but system

flexibility (and fun) goes way up with the addition of a patch bay

for ease of outboard equipment use. The pin out is on page 10.

This connector is not used.

It is best to make sure that the power supply is unplugged when

connecting the DC power cable to prevent damage to contacts in

the connectors.

The Main Output feeds the mixdown A/D converter.

These jacks have the same signal as the Main Outputs. They are to

feed the Dangerous Monitor or other monitor section.

-3-