AEV ProCal SNAP Посібник користувача - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник користувача для Блок управління AEV ProCal SNAP. AEV ProCal SNAP 9 сторінок. | jl wrangler & gladiator
Також для AEV ProCal SNAP: Посібник користувача (9 сторінок), Посібник користувача (16 сторінок)
Друкувати сторінку
PROGRAMMING VEHICLE
Once the pairing process has been completed, you are ready
to recalibrate your vehicle. Use the following method to
recalibrate Tire Size, Axle Ratio, or Transfer Case Ratio.
To recalibrate Tire Size: Begin by physically measuring your
tire diameter IN INCHES from the ground to the top of front
tire with the vehicle level and on the ground.
Recalibrating gear ratios is only necessary if you have
physically changed the vehicle's axle gears or replaced the
transfer case with a different ratio.
ACTUAL MEASURMENT
TO THE NEAREST 10th IN.
1
START
ENGINE
STOP
Press 2 times to put into the
"RUN" position.
3
Wait for a solid GREEN light
on the SNAP.
2
Insert ProCal SNAP into the
OBDII port.