Audiolab 8300CD Інструкція користувача - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкція користувача для Програвач компакт-дисків Audiolab 8300CD. Audiolab 8300CD 17 сторінок. Classic compact disc player with high quality dac incorporated
Друкувати сторінку2: Getting Started
Welcome to Audiolab 8300 Series.
8300CD is the latest version of Audiolab's classic Compact Disc player with high quality DAC
incorporated.
This versatile digital player now accepts inputs from a variety of digital sources right up to 24-bit/192kHz
(USB even high to 32-bit/384kHz) resolution and decodes them utilizing the high-end Sabre 32-bit DAC
with Audiolab's precision filters.
You can select between 7 different filter choices based on personal preference as well as suitability for
different sources, all at the touch of a button on the versatile remote control.
More than just a CD player, 8300CD is a versatile digital decoder that will serve you for many years to
come.
Please read through this manual to obtain the very best performance from 8300CD.
Inputs:
•CD disc playback.
•One external SPDIF stereo LPCM AES3 digital input
•Two external SPDIF stereo LPCM coaxial digital input
•Two external SPDIF stereo LPCM optical digital input
•USB 2.0 port for replaying stereo from a compatible host
Outputs:
•Balanced and unbalanced stereo analogue output
•Optical and coaxial SPDIF digital output.
•XLR SPDIF digital output
Operating Features:
•Automatic detection decoding of external digital input source.
•Selectable digital filter setting.
•Fully variable output in the digital domain absolute fidelity with the straightest possible signal path.
•Mute and balance controls.
• Automatic standby on-off switching of connected equipment via 12V trigger output.
• Analogue output level selectable between fixed and variable.
• Three display brightness levels with on/off options.
• Auto standby function with on/off options.
Note:
The 8300CD should be used with the variable outputs connected directly to a
power amplifier. If there are gain controls on the power amplifiers, set them to maximum and
leave them there. Use the volume control on the 8300CD exclusively to alter the level.
If you wish to connect the outputs of 8300CD into a pre-amplifier, you may wish to disable
the volume control functions, so that the player operates at a fixed gain. In this mode the unit
behaves as a CD/DAC operating in the digital domain.
Unpacking
• Unpacking the product fully. The carton should contain:
•The Audiolab 8300CD
•One IEC power cord suitable for your area.
•One CD-ROM for USB driver.
•One Remote handset with two AAA batteries.
•This instruction manual.
If an item is missing or damaged report this to your dealer as soon as possible. Retain the
packing for safe transport of your unit. If you dispose of the packing, do so with regard to
any recycling regulation in your area.
Placement
The unit is designed to run warm during normal operation but ensure you do not block any
ventilation openings.
Place the unit on a sturdy shelf or table. If you use an equipment rack ensure the unit has
adequate ventilation and is on its own shelf.
Ensure your mains voltage corresponds to the rating plate on the rear of the product's power
supply. If in doubt, consult your dealer. If you move to an area with a different mains voltage
seek advice from an Audiolab appointed dealer or a competent service technician.
Page 2