AEV ACUO 908 Serie Короткий посібник - Сторінка 15
Переглянути онлайн або завантажити pdf Короткий посібник для Музичний мікшер AEV ACUO 908 Serie. AEV ACUO 908 Serie 17 сторінок. On air broadcast console
Друкувати сторінку
Logic GPI/O port
•
GPO 1 Out ( Start / Stop A) through the encoder master to the voice GPIO1 (Start
/ Stop A) select the channel assignment, so when the channel will in Start, the
contact between 1 and 9 will close, with the channel in Stop the contact is open .
•
GPO 2 Out ( Start / Stop B ) through the Master encoder select GPIO2 (Start /
Stop B) and select the channel assignment, so when the channel will put in Start,
the contact between 2 and 10 will close , with the channel put in Stop the contact is
open.
•
GPO Tally : Endcoder in each channel, through the Encoder, to the item TALLY set
ON , so closes the contact between pins 3 and 11 will close when the channel is put
in Start
•
GPO 3 : Endcoder by the Master, under GPO3 select the channel assignment , so,
the contact between pins 4 and 12 will close when the channel will put in Start in,
the contact will open when you put in Stop the channel.
•
GPI 1 ( In Start/Stop A) : through the Master encoder select GPIO1 (Start/Stop
A) and select the channel assignment, in which way , from the outside, through a
circuit to activate the photo - coupler placed between the pins 5 and 13, states Start
and Stop will alternate in the channel , the status of which will be remote using the
control Out Start/Stop A
•
GPI 2 ( In Start/Stop B ) through the Master encoder select GPIO2 (Start/Stop
B) and select the channel assignment, in which way , from the outside, through a
circuit to activate the photo - coupler place between pins 5:13 states will alternate
start and stop of the channel , the status of which will be using the remote control
Out Start/Stop A
AEV Broadcast Srl, via della Tecnica 33 – 40050 Argelato (BO) Italy
ACUO 908 Serie - AEV ON AIR CONSOLE
Web site www.aev.eu
15
e-mail [email protected]