Conquip CS206-00500 Посібник користувача - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник користувача для Будівельна техніка Conquip CS206-00500. Conquip CS206-00500 11 сторінок.
Друкувати сторінкуOriginal Working Instructions
Usage Instructions
Important Usage Notes
•
The bale arm must be secured against dropping / swinging down whenever
the unit is not in use. This includes during transportation to and from site and
when loading and unloading from any vehicle.
•
The securing chain should be attached when the unit is in its horizontal
position and the bale arm is raised by the attached lifting equipment.
•
Tag lines should be used but only to allow for light manoeuvring.
•
The bale arm should not be lifted by hand, do not attempt to lift manually.
•
It is recommended that you apply kibble wax to the kibble to assist cleaning.
This is available from Conquip.
Usage Instructions
1. Attach the lifting apparatus' hook to the kibble's bale arm lifting point. Always
ensure that the hook's gate is correctly closed and the bale arm is seated
correctly in the hook.
2. Ensure the kibble's flow gate is fully closed and secured.
3. Raise the Concrete Coneflow Kibble and carefully manoeuvre to concrete
filling location.
4. Lower the kibble to the ground with the mouth of the kibble nearest the
concrete lorry. When the roll frame comes into contact with the ground, it
will assist the kibble into a horizontal position.
5. When the kibble is in its lowered position, resting on the roll frame, lower the
bale arm forward, out of the way of the large opening.
6. Fill the kibble at the hopper end with concrete until the kibble is full and the
load is level. The kibble can now be raised and moved to where it is required.
7. To aid manoeuvring, attach control tag to the kibble.
8. Carefully raise the kibble just off the ground and check for balance and
security.
9. Carefully move the load to its required position. Move slowly and carefully;
do not jolt the load.
5