Brainworx bx_control Посібник Посібник - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник Посібник для Обладнання для запису Brainworx bx_control. Brainworx bx_control 17 сторінок. Control listening and monitoring instrument. m/s matrix with mono maker and stereo width control. for scope systems

Друкувати сторінку

10. INPUT GAIN

to adjust the overall level of the stereo sound running through

the bx_control use the input GAIN knob.

Since this is an INPUT gain control turning it down a bit will

"cure" any internal clippings that may occur when MONO MAKER

and STEREO WIDTH CONTROL are being used.

6. How do I get started with the bx_control in a typical mastering,

recording or mixing session?

Recording, mixing and / or mastering music is all about HEARING

OBJECTIVELY...and enhancing musical performances if possible... and it is

(often enough...) about correcting mistakes that have been made in a

prior stage of the production... this sounds basic, but we do mean it

literally!

We assume that most if not all people who have purchased the bx_control

are familiar with using a standard dynamic tool or other tools as a plug-in

in their sequencer host program, so we will skip the total basics of "how to

use a plug-in" and go on with the possibilities arising from using just THIS

plug-in. Inserting the bx_control into any "plug-in-slot" of your sequencer

or editor will be done slightly different depending on which host program

you are using, and we are (well, at least "almost"!) sure that you already

know how to do this with YOUR host software...

6.a. RECORDING M/S microphone signals with the bx_control:

You may record the signals of your M (one ore several M mics are

possible!) & S (one S-mic only, please!) microphones individually and

route them straight into the bx_control. Either do this in REAL-TIME with a

proper routing or record the microphones individually and route them into

the bx_control AFTER you have recorded (e.g. during mixdown).

check the latency of your system! The bx_control will NOT add extra

latency for its operation! With most modern DAW systems you will be ok

to record "through" the bx_control "on the fly"...