Casio MT-640 Посібник з експлуатації - Сторінка 13
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Музичний інструмент Casio MT-640. Casio MT-640 16 сторінок. Electronic musical instrument
Друкувати сторінку11. MIDI
LLL
TL
NN
a
a
TET
a
a I
aS
11-4 Using the MT-640 as a multi-timbral sound source
In addition to single-keyboard transmission/reception, the MT-640 can be set
to receive multiple MIDI messages, assigning different voice to channels 1
through 3, with channel 4 used as either a fourth voice (see 11-8) or to send
MIDI clock messages (see 1).
< Multi-timbral Polyphony >
CH-1: 6 notes
CH-2: 4 notes
CH-3: 2 notes
CH: 4: 4 notes (when cea as a fourth voice)
|
1
11-5 To set the timbre ee
tone) of each MIDI channel'
A single preset tone can be assigned to each ae channel through the follow-
ing procedures.
:
@) Press the CH 1 pad of the channel select pads
(2) Select the desired preset tones by pressing the corresponding tone selec-
tor. The selected tone is assigned to MIDI channel 1.
(3) Repeat procedures () and @), pressing the CH 2 and CH 3 pads (and CH
4, if desired).
NOTE:
The voice assigned to each MIDI channel can be altered when the MT-640
receives program change messages from other MIDI keyboards or MIDI devices.
11-6 Balancing volume levels of MIDI channels
%é..
In addition to altering the master volume level in the MIDI mode, you can also
control the balance of MIDI channels 2 and 4, by using the ACCOMP VOLUME
(CH 2) and RHYTHM VOLUME
(CH 4) sliders.. The level of channel 3 is fixed.
é,
a)
(CH=1 ~4)
CH=1 ) Freely assigned to
CH=2?
one of the preset tones
(CLOCK=EXT)
CH=3 | on each channel
CH=4 Auto-rhythm
(CLOCK=INT)
re
MIDI OUT
MIDI OUT.
CH=1 ) Freely gecened
CH=2
{to one of the.
CH=3 | preset tones on
CH=4 ) each channel
(Ge 1 ~ 4)
NOTE:
295