Casio Privia PX-S3100 Посібник з підключення - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник з підключення для Музичний інструмент Casio Privia PX-S3100. Casio Privia PX-S3100 10 сторінок. Wireless midi & audio adaptor
Друкувати сторінку
■ Deleting Bluetooth Audio Capable Device Pairing
Registration
• Performing the procedure below will delete the pairing
registration between this Digital Piano and its currently
paired Bluetooth audio capable device. If you are
experiencing connectivity problems with a Bluetooth audio
capable device, perform the procedure below and then
perform the procedure under
Capable Device (Bluetooth Audio
• After performing the procedure below, you should also clear
the Digital Piano connection logs from all of the Bluetooth
audio devices that have been paired with the Digital Piano.
For information about how to do this, refer to the user
documentation of each Bluetooth audio device.
1.
Connect the Wireless MIDI & audio adaptor to
the
USB Type A port.
• You will not be able to delete a Bluetooth audio paring
registration unless a Wireless MIDI & audio adaptor is
connected to the Digital Piano.
2.
Hold down the
appears on the display. Then release the
button.
This enters the FUNCTION mode.
3.
Use the
and
"WIRELESS", and then touch
4.
Use the
and
"Pairing Clear" and then touch
This causes "Sure?" to appear on the display.
• Step 5 below executes the clear operation. To cancel
the delete operation at this time, touch
5.
To delete, touch
This will terminate the Bluetooth connection, which is
indicated by the Bluetooth indicator disappearing.
■ Adjusting Bluetooth Audio Input Volume and
Applying Center Cancel
When you are playing audio input from a Bluetooth audio
device through the Digital Piano's speakers, you can adjust
the volume level and even apply center cancel.
■ Center Cancel (Vocal Cut)
Turning on center cancel cuts (eliminates or reduces) the
vocal part from the audio being input. Note that this function
cancels the sound in the center position of the audio, but it
may also cancel something else other than the vocal part.
How center cancel is performed depends on the sound being
input.
EN-2
®
"Sounding a Bluetooth
Pairing)" (page EN-1).
button until "[FUNCTION]"
buttons to display
ENTER.
buttons to display
ENTER.
–.
+.
■ To adjust the Bluetooth Audio input volume level
1.
Hold down the
appears on the display. Then release the
button.
This enters the FUNCTION mode.
2.
Use the
"WIRELESS", and then touch
Audio
3.
Use the
"Audio Volume" and then touch
4.
Use the
setting.
• You can specify a volume value from 0 to 127.
• To return to the initial default setting, touch
+ at the same time.
5.
To exit the FUNCTION mode, hold down
EXIT until "[FUNCTION]" disappears from
the display.
■ To change the center cancel setting for
Bluetooth Audio input
1.
Under
volume
2.
Use the
"Audio C Cancel" and then touch
3.
Use the
setting between "On" (center cancel enabled)
and "Off" (center cancel disabled).
4.
To exit the FUNCTION mode, hold down
EXIT until "[FUNCTION]" disappears from
the display.
button until "[FUNCTION]"
and
buttons to display
and
buttons to display
– and
+ buttons to change the
"To adjust the Bluetooth Audio input
level", perform steps 1 and 2.
and
buttons to display
– and
+ buttons to switch the
ENTER.
ENTER.
– and
ENTER.