Conrad Electronic RC Logger 2 Інструкція з експлуатації Посібник з експлуатації - Сторінка 7
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Вимірювальні прилади Conrad Electronic RC Logger 2. Conrad Electronic RC Logger 2 20 сторінок. Digital pitch gauge
2. Platzieren Sie die Pitch-Einstelllehre auf dem Befestigungsadapter für das Hauptrotorblatt. Die Position
der Pitch-Einstelllehre wird durch die Magnete auf der Pitch-Einstelllehre und der Befestigungsplatte fi xiert.
3. Ziehen Sie den Befestigungsadapter für das Hauptrotorblatt so weit ab, dass Sie das Hauptrotorblatt
problemlos im Adapter platzieren können. Um exakte Messergebnisse zu erhalten, muss der Adapter
nah am Rumpf des Helikopters platziert werden (bei etwa 1 Drittel der Rotorlänge).
4. Lesen Sie nun den Messwert für den Nickwinkel ab, oder verwenden Sie ein voreingestelltes Profi l (Modus 1).
5. Stellen Sie das Hauptrotorblatt ein, um den gewünschten Winkel zu erhalten.
Verwenden des Metallstiftzeigers
Während des Messvorgangs an den Hauptrotorblättern können Sie den Metallstiftzeiger verwenden.
Schrauben Sie dazu den Zeiger in das Schraubgewinde an der Oberseite der Pitch-Einstelllehre. Der
Zeiger vereinfacht das Ablesen des Nickwinkels.
34
> Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
> Also observe the safety and operating instructions of any other devices which are connected to the
product.
> The product may not work with strong electromagnetic interference. Stay away from sources of
electromagnetic interference and restart the product if you have had problems with it.
Batteries
> Correct polarity must be observed while inserting the batteries.
> Batteries should be removed from the device if it is not used for a long period of time to avoid damage
through leaking. Leaking or damaged batteries might cause acid burns when in contact with skin,
therefore use suitable protective gloves to handle corrupted batteries.
> Batteries must be kept out of reach of children. Do not leave the battery lying around, as there is risk,
that children or pets swallow it.
> All the batteries should be replaced at the same time. Mixing old and new batteries in the device can lead
to battery leakage and device damage.
> Batteries must not be dismantled, short-circuited or thrown into fi re. Never recharge non-rechargeable
batteries. There is a risk of explosion!
Miscellaneous
> Consult an expert when in doubt about operation, safety or connection of the device.
> Maintenance, modifi cations and repairs are to be performed exclusively by an expert or at a qualifi ed
shop.
> If you have questions which remain unanswered by these operating instructions, contact our technical
support service or other technical personnel.
7