3xLogic V Series Посібник із швидкого старту - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Камера спостереження 3xLogic V Series. 3xLogic V Series 13 сторінок.

4 Accessing Camera Settings and Video

To begin viewing video or configuring a camera's network settings from the camera's web interface, the user

must first identify the device's IP address. The default IP address of the camera is 192.168.XXX.XXX. The

default subnet mask is 255.255.0.0

On simple, private networks, a user can manually identify the IP address of the camera by converting the camera's

MAC address hex values, however, the alternative method, which is recommended by 3xLOGIC, is to use the

3xLOGIC (VSX-IP) Camera Setup Utility. The utility makes detection and configuration of VISIX camera's in any

network environment simple and easy, regardless of network complexity.

Both methods require that the camera and the PC being used to communicate with it reside on the same network.

4.1

Users can access the camera's web interface and settings using a device's default IP address: In case of generic

private network environment where IP address 192.168.XXX.XXX are used, the following procedure can be used to

identify a device's IP address.

Steps:

1).

Convert the device's MAC address to the IP address. Refer to Section 10:

Conversion Table

affixed to the side or bottom of the device).

MAC address = 00-13-23-01-14-B1 → IP address = 192.168.20.177

Convert the last two sets of hexadecimal numbers to decimal numbers.

2).

Start the Microsoft® Internet Explorer/Edge web browser and enter the address of the device.

3).

Web streaming and device configurations are supported through ActiveX program. When the ActiveX

installation window appears, authorize and install the ActiveX.

4.2

Using the 3xLOGIC Camera (VSX-IP) Setup Utility is recommended for any network environment as it will find all

VISIX cameras across multiple subnet masks, utilizing mDNS search discovery. Camera information such as IP

Address, Subnet Mask and Gateway Settings will be displayed and can be edited from this utility.

Steps:

1).

To search for a device, launch the utility VSXIPUtility.exe. Click on Detect Online Devices/ Change IP

Address to proceed to the Online Devices window.

10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC

at the end of the manual (the MAC address of the device is written on the label

VISIX Camera Quick Start Guide | VX-2A-B-IWD (R)

Hexadecimal-Decimal