DANLERS SILVAIR MESH-HBWD DALI Посібник із швидкого старту

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Датчики безпеки DANLERS SILVAIR MESH-HBWD DALI. DANLERS SILVAIR MESH-HBWD DALI 2 сторінки. Ceiling high bay (wide) passive infra red (pir) occupancy detector & photocell for dali ballasts

Друкувати сторінку

MESH-HBWD DALI

Ceiling High Bay (Wide) Passive Infra Red (PIR)

Occupancy Detector & Photocell for DALI ballasts

Input: 100-240 Vac 50/60Hz

PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLING THE PRODUCT

NOTE: MESH-

HBWD DALI

is compatible with any qualiﬁ ed Bluetooth mesh components and commissioning tools.

We recommend Silvair Commissioning as a reliable solution.

This MESH-HBWD DALI High Bay (Wide Detection)

Lighting Control can be mounted directly onto

solid ceilings or onto a range of different mounting

boxes. Conﬁ gurable for any room occupancy style,

via the Silvair Platform (App and Web).

INSTALLATION

To be installed by a competent person with

reference to BS 7671 or equivalent local standards.

If in doubt consult a qualiﬁ ed electrician.

• Plan where the MESH-HBWD DALI is to be

located (see diagram 1). Switch off supply and

check for hidden cables and pipes.

• The MESH-HBWD DALI should be connected as

shown in diagrams 2 and 3:

Live in.

N Neutral in.

DALI control line (polarity independant)

• Knockout or drill the approprdiate holes on the

mounting plate for attaching the plate to the ceiling

or back box (if applicable). Feed cables through

the appropriate (side or rear) entry hole. Screw the

back mounting plate to the ceiling or back box

via the mounting holes. Wire the cables into the

sensor head block terminal. Push the sensor head

onto the mounting plate and align the side clips

with the slots on the sensor heads.

OPERATION

To check the operation of the MESH-HBWD DALI:

• Turn on the supply then after 20 seconds if the

sensor has recognised movement of a person

within its zone of detection the integral red LED

on MESH-HBWD DALI will stay illuminated for 4

seconds before the red LED turns off.

• Thereafter, every time movement is detected by

MESH-HBWD DALI the integral red LED will stay

illuminated for 4 seconds.

The control also features adjustable time out (time

lag) control and daylight threshold control which

are conﬁ gured by the Silvair APP.

PRECAUTIONS

• Do not place the MESH-HBWD DALI near heat

sources, fans or in ventilated ceiling voids.

• MESH-HBWD DALI can be wired in parallel

(sharing the same Live and Neutral).

• Do not place close to, or positioned such

that, any light source points directly into the

MESH-HBWD DALI.

• Ensure wires and cables are securely held within

the connection terminals.

• The MESH-HBWD DALI should be protected by

a 5 or 6 Ampere mcb or fuse.

• Disconnect the MESH-HBWD DALI from the

circuit before performing insulation testing

of the wiring circuit.

DANLERS Limited, Vincients Road, CHIPPENHAM, Wiltshire, SN14 6NQ, UK.

Telephone: +44 (0)1249 443377 Fax: +44 (0)1249 443388 E-mail: [email protected]

www.danlers.co.uk

Company Registered Number 2570169 VAT Registration Number 543 5491 38

23/08/19

TECHNICAL DETAILS

INPUT

Voltage:

100 - 240Vac

Frequency:

50/60Hz

Max. mains current:

20mA

Standby current:

18mA

OUTPUT

Output:

DALI

16mA

Output Current:

(maximum 8 ballasts)

RADIO TRANSCEIVER

Operating frequencies:

2.4... 2,483 GHz

Max. output power:

+4 dBm

LUX PARAMETERS

Range:

5 - 2000 lux

OPERATING CONDITIONS

Note: The temperature difference between the

detection target and the background must be at

least 4 °C.

-20... +40 °C (lout

Ambient temperature:

20mA)

Storage temperature:

-25... +75 °C

Max. relative humidity:

0... 80%, non cond.

CONNECTORS

Terminal block

0.5mm

Wire size:

or stranded

Wire strip length:

6-7mm

Tightening torque:

0,4 Nm/4 Kgf.cm

MECHANICAL DATA

Dimensions:

63mm x 91mm x 91mm

Weight:

105g (unpacked)

Degree of protection:

IP20

Protection class:

Built-in Class 2

Flame-retardant

Material (casing)

polycarbonate

Finish / Colour

Matt /White (RAL 9003)

Protection class:

Built-in Class 2

CONFORMITY AND STANDARDS

EMC emission:

EN 301 489-1 V2.2.0, EN 301 489-17 V3.1.1,

EN 55032: 2015, EN61000-3-2: 2014,

EN61000-3-3: 2013

EMC immunity:

EN 301 489-1 V2.2.0, EN 301 489-17 V3.1.1

Environment:

Complies with WEEE and RoHS directives

Suggested typical wiring

5A or 6A MCB

- 2.5mm

solid

MESH-HBxx DALI

plan

5 YEAR WARRANTY

MESH-HBWD DALI comes with a

5 year warranty from the date of

manufacture and is CE marked.

INS439 MESH-HBWD DALI (Issue 01)

Mounting height

up to 14m

Perspective view -

ceiling mounted

Up to

28m diameter

DIAGRAM 1

or fuse

DIAGRAM 2

Ballast

DALI

Control Lines

DIAGRAM 3

side

DIAGRAM 4