Addonics Technologies AESCHDSAU2 Посібник користувача - Сторінка 15
Переглянути онлайн або завантажити pdf Посібник користувача для Зберігання Addonics Technologies AESCHDSAU2. Addonics Technologies AESCHDSAU2 17 сторінок. Saturn combo hard drive
Друкувати сторінкуPCMCIA Installation for Windows NT
1. Go to Start\Settings\Control Panel
2. Double Click SCSI adapter icon
3. Click on the Driver Tab
4. Click Add to add new driver
5. Follow wizard and point to the location of the driver. (Follow the steps
from the Driver Disc to where you saved the driver files)
6. Select "Addonics PCMCIA..." then click ok.
7. Windows will prompt you for driver location again, to continue
Type in A:\NT then click continue.
8. Click YES to restart your computer.
9. Double Click on the "My Computer" icon. You are now ready to use
the Combo hard drive kit.
Note: You must use the PCMCIA mode for Windows NT.
CardBus/PCMCIA Installation for Windows 2000
1. Make sure your computer is up and running
2. Verify that all cables are connected and there is power to the drive.
3. Insert the PCMCIA cable to the PCMCIA socket.
4. A "New Hardware Found" message shall pops up.
5. Select "Next" to continue installation.
6. Select "Search for a suitable driver...." button and select "Next".
7. In "select a Device Driver page", select "Have Disk" to specify
location. Follow wizard and point to the location of the driver. (Follow
the steps from the Driver Disc to where you saved the driver files)
Select "Addonics CardBus...." click YES for the Windows warning
message and let Win2000 to finish the Installation and that's it.
8. Double Click on the "My Computer" icon. You are now ready to use
the
Combo hard drive kit.
Note:
Brand New Hard drive must be Partitioned and Formatted first.
Addonics Technologies
Saturn Combo Hard Drive User Guide
2/2/05
14