Audionet EPS Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Джерело живлення Audionet EPS. Audionet EPS 7 сторінок. Enhanced power supply
Також для Audionet EPS: Посібник користувача (13 сторінок)

Друкувати сторінку

Placing and connecting

Please switch off all your High-End units before continuing.

Place the Enhanced Power Supply EPS right beside or with a minimum

distance of 15 cm above your Audionet PRE1, PRE 1 G2, PAM, CAT,

MAP, MAP 1 or VIP G2 (=mother unit). Connect the EPS to the mother

unit using the provided cable.

Make sure the voltage specifications printed on the rear of the EPS match

your actual power voltage.

Connecting PRE 1, PRE 1 G2, PAM or CAT:

Now remove the power cord from the mother unit and plug it into the

EPS instead. The system is now ready to use.

Note: Inserting a second power cord to the PRE1, PRE 1 G2, PAM or

CAT is not necessary and can decrease sound quality. Use only one

power cord. Due to this there is no power cord provided with the EPS.

Connecting MAP, MAP 1 or VIP G2:

Note: In contrast to the other mother units, when connecting a MAP,

MAP 1 or VIP G2 to the EPS both units must have inserted a power

cord. For further details please refer to the user's manual of your MAP,

MAP 1 or VIP G2.