Danmini YA-300-GSM Посібник користувача - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник користувача для Система безпеки Danmini YA-300-GSM. Danmini YA-300-GSM 16 сторінок. Security gsm alarm system

Друкувати сторінку

Notes: "A" indicates the number of defence zone; "B" indicates the type of defence zone; "C" indicates the location

of alarm; "D" indicates if the siren sounds.

A: Number of defence zone: [1~6] corresponds to defence zone 1 to defence zone 6 respectively.

B: Type of defence zone: [1] real-time, [2] 40 seconds delay, [3] 24 hours a day, [4] bypass.

C: Installation Location: [1] help alarm, [2] fire alarm, [3] gas leak, [4] door lock alarm, [5] hall alarm, [6] window

alarm, [7] balcony alarm, [8] perimeter alarm.

D: Type of siren: [0] sound-off, [1] sound-on

Illustration: set the defence zone 1 to 24 hours a day, fire alarm with sound.

SMS Command:

8888601321#



defence zone at Home

In the status of setting, press the address code [61], enter the corresponding

number of defence zone by [1~6] and select [0/1], at last add [#] to confirm.

Operations:

"A" number of defence zone: [1~6] corresponds to defence zone 1 to defence zone 6 respectively.

"B" arm at home (stay-at-home): [0] indicates invalid (no alarm), [1] indicates valid (enable alarm).

Illustration: "A" indicates the number of defence zone; "B" indicates arm at home is valid/invalid; set the defence

zone 1 to arm at home.

SMS Command:

88886111#



Operating Siren

n the status of remote control programming, enter the address code [75]; in the operation of arm/disarm by

remote control, select if the siren sounds or not by [0/1], then add [#] to confirm. [1]: sounds on; [0]: sound off; the

factory default is [0], indicating that it doesn't emit a prompt tone.

Operations:

Notes: "A" indicates if the siren emits a prompt when enabling and disarm by remote control: [0] sound on, [1]

sound-off.

SMS Command:

8888751#

■ Custom the content of Zone Alarm Message

Custom SMS format: [Program password] + [9] + [1-6 zone] + # + [within 20 characters] + #

For example: Change the SMS that come from Zone 5 Alarm to : office of the alarm

SMS content is : 888895# office of the alarm #

After zone 5 alarm, the sending message will be " office of the alarm ".

Delete custom message: [9] + [1-6 zone] + #

SMS Command: 888891-6#